© 2018 DESCO INDUSTRIES INC
Employee Owned
DRAWING
NUMBER
36092
DATE:
July
2018
ESD BRUSH, CONDUCTIVE, FLAT HANDLE, BLACK SOFT NYLON
BRISTLES, 2 IN
Characteristics:
• ESD Brushes are ideal for removing dust, dirt, and left over materials
from printed circuit boards (PCB) and other static senstive components
• Conductive black polypropylene handle
• Brushes minimize static charge generation and remove electrostatic
charges to ground when held by grounded personnel
• RTT Resistance: 1 x 10
3
to <1 x 10
5
ohms tested per modified ANSI/
ESD S4.1
• Bristle Material: Black conductive nylon
3651 WALNUT AVE., CHINO, CA 91710
PHONE: (909) 627-2453
WEBSITE: MendaPump.com
2”
Item
Handle
Type
Bristle
Hardness
Overall
Length
Overall
Width
Bristle
Length
Bristle
Width
Bristle
Height
36092 Flat Soft 6-7/8” (175 mm) 2" (51 mm) 1-7/16” (37 mm) 2” (51 mm) 3/16” (5 mm)
Specications and procedures subject to change without notice.
Unless otherwise noted, tolerance is ±10%.
Made in Israel
6-7/8”
Designed to fulfill ANSI/ESD S20.20 requirement to ground all
conductors at ESD workstation.
ESD Handbook TR20.20 Table 1 lists under Typical Static Electricity
Sources “Brushes (camel/pig hair and synthetic bristles).”
“It should be understood that any object, item, material or person could
be a source of static electricity in the work environment. Removal of
unnecessary nonconductors, replacing nonconductive materials with
dissipative or conductive materials and grounding all conductors are
the principle methods of controlling static electricity in the workplace,
regardless of the activity.” (TR 20.20 section 2.4)
