R
o
H
S
Telecom Design Guide • © 2006 Littelfuse 3 - 5 www.littelfuse.com
SIDACtor Devices
MicroCapacitance (MC) SC SIDACtor® Device
These DO-214AA SCMC SIDACtor devices are intended for applications sensitive to load
values. Typically, high speed connections, such as xDSL and T1/E1, require a lower
capacitance. C
O
values for the MicroCapacitance device are 40 percent lower than a
standard SC part.
This SCMC SIDACtor series enables equipment to comply with various regulatory
requirements including GR 1089, IEC 60950, UL 60950, TIA-968-A (formerly known as
FCC Part 68), and ITU K.20, K.21, and K.45.
* “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number.
For surge ratings, see table below.
General Notes:
• All measurements are made at an ambient temperature of 25 °C. I
PP
applies to -40 °C through +85 °C temperature range.
• I
PP
is a repetitive surge rating and is guaranteed for the life of the product.
• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
• V
DRM
is measured at I
DRM.
• V
S
is measured at 100 V/µs.
• Special voltage (V
S
and V
DRM
) and holding current (I
H
) requirements are available upon request.
* Current waveform in µs
** Voltage waveform in µs
Electrical Parameters
Part
Number *
V
DRM
Volts
V
S
Volts
V
T
Volts
I
DRM
µAmps
I
S
mAmps
I
T
Amps
I
H
mAmps
P0080SCMCL 6 25 4 5 800 2.2 50
P0220SCMCL 15 32 4 5 800 2.2 50
P0300SCMCL 25 40 4 5 800 2.2 50
P0640SCMCL 58 77 4 5 800 2.2 150
P0720SCMCL 65 88 4 5 800 2.2 150
P0900SCMCL 75 98 4 5 800 2.2 150
P1100SCMCL 90 130 4 5 800 2.2 150
P1200SCMCL 100 130 4 5 800 2.2 120
P1300SCMCL 120 160 4 5 800 2.2 150
P1500SCMCL 140 180 4 5 800 2.2 150
P1800SCMCL 170 220 4 5 800 2.2 150
P2000SCMCL 180 220 4 5 800 2.2 120
P2100SCMCL 180 240 4 5 800 2.2 150
P2300SCMCL 190 260 4 5 800 2.2 150
P2500SCMCL 230 290 4 5 800 2.2 120
P2600SCMCL 220 300 4 5 800 2.2 150
P3100SCMCL 275 350 4 5 800 2.2 150
P3500SCMCL 320 400 4 5 800 2.2 150
Surge Ratings in Amps
Series
I
PP
I
TSM
50 / 60 Hz di/dt
0.2x310 *
0.5x700 **
2x10 *
2x10 **
8x20 *
1.2x50 **
10x160 *
10x160 **
10x560 *
10x560 **
5x320 *
9x720 **
10x360 *
10x360 **
10x1000 *
10x1000 **
5x310 *
10x700 **
Amps Amps Amps Amps Amps Amps Amps Amps Amps Amps Amps/µs
C 50 500 400 200 150 200 175 100 200 30 500