www.panduit.com
Dimensions:
1.73"H x 17.5"W x 12.13" D (43.9 x 444.5 x 308.2mm)
Mounting option:
Integral brackets mount to 19" wide EIA-310/IEC 60297 compatible
rack or cabinet
Accessories:
Mounting hardware and fiber routing accessory kit included;
contains two FMS1 fiber management spools, two 30mm size rubber
grommets, one PG11 cable gland, Panduit
®
Pan-Ty
®
Cable Ties and
#12-24 and M6 x 1 mounting screws
key features and benefits
applications
technical information
Pre-loaded fiber drawers provide a pre-configured,
ready-to-install system for managing fiber optic
terminations. The pre-loaded enclosure is a
two-piece design with a slide-out drawer for full
access to all fiber terminations and easy installation.
The fiber drawer has integral mounting brackets
suitable for installation in any 19" wide EIA-310/IEC
60297 compatible rack or cabinet.
Pre-loaded with
Factory configured with duplex SC or LC adapters for
fiber optic adapters
fast and easy cabling and installation
Slide out drawer
Slides forward a full 300mm for easy service access to all
fiber terminations, connections and splices
Multiple cable entry methods
Trunk and interconnect cable entry via PG11 glands,
5mm blown fiber glands, 20mm knockouts or 30mm
rubber grommets
Two-piece, all metal
Simple and economical installation with no loose
body construction
components to misplace; improved protection over plastic
fiber drawers
Dedicated labeling areas
Silk-screened white labeling areas for individual fiber
channel identification plus overall enclosure labeling
• Provides a ready-to-install system for
managing fiber optic terminations,
connections and patching in a variety
of applications
• Can serve as a transition from backbone
cabling to distribution switching in
telecommunication rooms, an interconnect
to active equipment switches in a fiber to
the zone application and can be used as
a transition enclosure for splicing to
service provider trunks then patching
to premise intra-building cabling
• Pre-loaded with SC or LC style adapters
suitable for use with 50/125µm (OM2
or OM3/OM4) multimode, 62.5/125µm
(OM1), or OS1/OS2 singlemode fiber
• Can terminate and manage up to 48 fibers
in 1 RU depending on configurations and
adapter type
NetKey
®
Pre-Loaded Fiber Drawer
for OM2 50/125µm Multimode Fiber
6 duplex
SC adapters:
NKFD1W6BLDSC
12 duplex
SC adapters:
NKFD1W12BLDSC
12 duplex
LC adapters:
NKFD1W12BLDLC
24 duplex
LC adapters:
NKFD1W24BLDLC
NetKey
®
Pre-Loaded Fiber Drawer
for OM3/OM4 50/125µm
Multimode Fiber
6 duplex
SC adapters:
NKFD1W6AQDSC
12 duplex
SC adapters:
NKFD1W12AQDSC
12 duplex
LC adapters:
NKFD1W12AQDLC
24 duplex
LC adapters:
NKFD1W24AQDLC
NetKey
®
Pre-Loaded Fiber Drawer
for OS1/OS2 9/125µm
Singlemode Fiber
6 duplex
SC adapters:
NKFD1W6BUDSCZ
12 duplex
SC adapters:
NKFD1W12BUDSCZ
12 duplex
LC adapters:
NKFD1W12BUDLCZ
24 duplex
LC adapters:
NKFD1W24BUDLCZ
Splicing Accessories
Fiber splice module,
24 fusion splices:
FOSMF
Fiber splice module,
12 mechanical splices:
FOSMM
Fiber splice chip,
24 fusion splices:
FSC24
NetKey
®
Pre-Loaded Fiber Drawer
for OM1 62.5/125µm Multimode Fiber
6 duplex
SC adapters:
NKFD1W6EIDSC
12 duplex
SC adapters:
NKFD1W12EIDSC
12 duplex
LC adapters:
NKFD1W12EIDLC
24 duplex
LC adapters:
NKFD1W24EIDLC
NetKey
®
Pre-Loaded Fiber Drawers
DATA SHEET
