THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
*
*
DO NOT
SCALE FROM
THIS PRINT
.3500 8.890
REF
.045
x .018 [.46]REF
1.143
.020 0.51
x .010 [.25] REF
"A"
"A"
"C"
"C"
HPFCR-24-D-X
.200
REF
5.08
((No OF POSITIONS x .1000 [2.540]) + (No OF POWER
POSITIONS x .2000 [5.080]) + .1000 [2.540]
.010 [.25]
.100
REF
2.54
.1500
±.003
3.810
±0.08
(SEE NOTE 8)
(No OF POWER POS -1) x .2000 [5.080]
.003 [.08]
.2000 5.080
(No OF POS -1) x .1000 [2.540]
.003 [.08]
.1500
±.003
3.810
±0.08
02
01
01
04
C
C
C
.280 7.11
REF
.3550 9.017
90°
-
0°
+
5°
SECTION "A"-"A"
C-130-04-X
[STYLE -02]
C
.0970 2.464
C-130-03-X
STYLE -01
[POWER END]
C
HPFC-1XX-XX-XX-D-XX-XX
No OF POSITIONS
-02 THRU -24
(PER ROW)
ROW SPECIFICATION
-D: DOUBLE (USE HPFCR-24-D-X-X)
LEAD STYLE
-01: THROUGH HOLE
(C-95-01-X & C-130-03-X)
-02: SURFACE MOUNT
(C-95-02-X & C-130-04-X)
PLATING SPECIFICATION
POWER POSITIONS
-02 THRU -04
(USE C-130-03-X AND C-130-04-X)
* = NOT ENGINEERING APPROVED
SIGNAL ONLY
-T: MATTE TIN ON CONTACT AND TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-TM: MATTE TIN CONTACT AND TAIL
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-LC: LOCKING CLIP
(SEE NOTE 9 & 10)
-A: ALIGNMENT PIN
(USE HPFCR-XX-D-X-A)
-K: KAPTON PAD (SHEET 2)
(USE K-500-300)
OPTION
.123 3.12
.163 4.14
C-95-01-X
C
STYLE -01
[SIGNAL END]
.3550 9.017
90°
+
-
5°
0°
.270 6.86
REF
SECTION "C"-"C"
C-95-02-X
C
[STYLE -02]
((No OF POSITIONS x .1000 [2.540]) + (No OF POWER
POSITIONS x .2000 [5.080]) - .2500 [6.350])
.005 [.13]
2° MAX SWAY
(ANY DIRECTION)
C
.056
x .010 [.25] REF
1.42
.0440 1.118
LC-05-TM
-LC OPTION
[STYLE -02]
.0420 1.067
[STYLE -02]
-A OPTION
'B'
DETAIL 'B'
SCALE 3 : 1
C
C
*
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01[.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
.200 [5.08] POWER COMBO SOCKET ASSEMBLY
BY:
HPFC-1XX-XX-XX-D-XX-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
DEAN P
01/06/1999
2
1
SHEET SCALE: 1:1
INSULATOR: VECTRA E130i COLOR: BLACK
POWER CONTACT: BeCu 174HT
SIGNAL CONTACT: PHOS BRONZE CDA510
F:\DWG\MISC\MKTG\HPFC-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. COPLANARITY TO BE WITHIN .006" [.15] FOR 20
POSITION AND BELOW (SIGNAL) AND .008" [.20] FOR 21 -32 POS. (SIGNAL).
3. BURR ALLOWANCE: .003 [.08] MAX.
4. MAXIMUM CUT FLASH: .020 [.51].
5. MINIMUM PUSHOUT FORCE: 1 LB. MIN ON SIGNAL POSITIONS,
2 LB. MIN ON POWER POSITIONS.
6. MAXIMUM ALLOWABLE BOW: .005 INCH/INCH [MM/MM] AFTER ASSEMBLY.
8. MINIMUM WALL THICKNESS TO BE .010 [.25].
9. -LC OPTION NOT AVAILABLE WITH -01 LEAD STYLE.
10. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT, SAMTEC RECOMMMENDS MANUAL
PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
7. OPEN PART OF POWER CONTACT FILLED TOWARDS SIGNAL CONTACTS.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION AE
