4793.3200 Datasheet 4793.7200, 4793.6000, 4793.3200 | P1-P3

Connectors (Inlets/Outlets)

4793

https://www.schurter.com /PG07

Connectors

IEC Appliance Inlet C20, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal

Snap-in version Snap-in version

See below:

Approvals and Compliances

C20

70° C

C24

70° C

Description

- Panel Mount :

Snap-in , from front side

- Appliance Inlet , Pin temperature 70 °C , protection class I or II

- Safety of electrical appliances for household and similar purposes.

Meets the requirements for appliances in unattended use. This inclu-

des the enhanced requirements of glow wire tests acc. to IEC 60695-

2-12 and -13.

- Solder terminals or quick connect terminals

Other versions on request

- Variant with notch for V-Lock mating Cordsets

References

Alternative: version with line filter C20F; 5130

Weblinks

pdf datasheet, html-datasheet, General Product Information, Distributor-

Stock-Check, Accessories, Detailed request for product, Microsite

Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.

The cord latching system prevents against accidental removal of the cordset.

Technical Data

Ratings IEC 16 A / 250 VAC; 50 Hz

Ratings UL/CSA 20 A / 250 VAC; 60 Hz

Dielectric Strength > 2 kVAC between L-N

> 2 kVAC between L/N-PE

(1 min/50 Hz)

Allowable Operation Tempe-

rature

-25 °C to 70 °C

IP-Protection from front side IP 30 acc. to IEC 60529

Insulation cover Suitable for appliances with protection

class I or II acc. to IEC 61140

Terminal Solder terminals or quick connect ter-

minals

Panel Thickness S Snap-in: 1/1.2/1.5/2/2.5/3 mm

Material: Housing Thermoplastic, black / white, UL 94V-0

appliance inlet/-outlet C20 or C24 acc. to IEC 60320-1,

UL 60320-1, CSA C22.2 no. 60320-1

(for cold conditions) pin-temperature 70

°C, 16 A, Protection Class I or II

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: 4793

Approval Logo Certificates Certification Body Description

VDE Approvals VDE Certificate Number: 40030341

UL Approvals UL UL File Number: E96454

CQC Approvals CQC CCC Certificate Number: 2017180204002910

Connectors (Inlets/Outlets)

4793

https://www.schurter.com /PG07

Connectors

Product standards

Product standards that are referenced

Organization Design Standard Description

Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes

Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles

Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices

Application standards

Application standards where the product can be used

Organization Design Standard Description

Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information

technologyequipment.

Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets

the requirements for appliances in unattended use. This includes the en-

hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13.

Compliances

The product complies with following Guide Lines

Identification Details Initiator Description

CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable

requirements laid down in the harmonisation of Community legislation on

its affixing in accordance with EU Regulation 765/2008.

RoHS SCHURTER AG EU Directive RoHS 2011/65/EU

China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March

2007. It is similar to the EU directive RoHS.

REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,

Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as

"REACH") entered into force.

MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The

connector is equipped with a notch intended for use with the latching

cordset. The cord latching system prevents against accidental removal of

the cordset.

White paperGlow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use.

This includes the enhanced requirements of glow wire tests acc. to IEC

60695-2-12 and -13.

Dimensions [mm]

36.0

3.0

28.0

max.R3.0

24.0

32.0

21.0

31.9

23.9

±0.10

-0

+0.2

-0

+0.2

1) Panel cut-out

E: Solder terminals: 28.5 mm

E: Quick connect terminals 6.3 x 0.8 mm: 31.5 mm

Connectors (Inlets/Outlets)

4793

https://www.schurter.com /PG07

Connectors

All Variants

Protection Class Color Panel mounting Panel Thickness

s [mm]

Terminal Order Number

I black Snap-in 1 Quick connect terminals 6.3 x 0.8 mm 4793.3000

█

I black Snap-in 1.2 Quick connect terminals 6.3 x 0.8 mm 4793.8000

█

I black Snap-in 1.5 Quick connect terminals 6.3 x 0.8 mm 4793.4000

█

I black Snap-in 1.5 Quick connect terminals 6.3 x 0.8 mm 4793.4000.21

II black Snap-in 1.5 Quick connect terminals 6.3 x 0.8 mm 4793.4010

I black Snap-in 2 Quick connect terminals 6.3 x 0.8 mm 4793.5000

█

I black Snap-in 2 Quick connect terminals 6.3 x 0.8 mm 4793.5000.21

I black Snap-in 2.5 Quick connect terminals 6.3 x 0.8 mm 4793.6000

I black Snap-in 3 Quick connect terminals 6.3 x 0.8 mm 4793.7000

I black Snap-in 1 Solder terminals 3.8 x 0.8 mm 4793.3200

I black Snap-in 1.2 Solder terminals 3.8 x 0.8 mm 4793.8200

I black Snap-in 1.5 Solder terminals 3.8 x 0.8 mm 4793.4200

█

II black Snap-in 1.5 Solder terminals 3.8 x 0.8 mm 4793.4210

I black Snap-in 2 Solder terminals 3.8 x 0.8 mm 4793.5200

I black Snap-in 2.5 Solder terminals 3.8 x 0.8 mm 4793.6200

I black Snap-in 3 Solder terminals 3.8 x 0.8 mm 4793.7200

█ Most Popular.

Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER

Suffix ".21" corresponds to the version with V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cord-

set. The cord latching system prevents against accidental removal of the cordset.

Packaging unit

100 Pcs

Accessories

Description

Wire Harness

Wire harness for SCHURTER products

Assorted Covers

Rear Cover

0859.0047

Cord retaining kits

Cord retaining strain relief

Flat head, L 4700.0011

P1-P3 P4-P4

4793.3200

Mfr. #:

Buy 4793.3200

Manufacturer:

Schurter

Description:

AC Power Entry Modules 4793 APPLIANCE INLET 16A 70

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

4793.3200

4793.3200

Products related to this Datasheet