NJM2265
- 4 -
Ver.2004-02-17
■
APPLICATION
This IC requires 1M resistance between INPUT and GND pin for clamp type input since the minute current
causes an unstable pin voltage.
This IC requires 0.1uF capacitor between INPUT and GND, 1M resistance between INPUT and GND for
clamp type input at mute mode.
[CAUTION]
The specifications on this databook are only
given for information , without any guarantee
as regards either mistakes or omissions. The
application circuits in this databook are
described only to show representative usages
of the product and not intended for the
guarantee or permission of any right including
the industrial rights.
