SPECIFICATION CONTROL DRAWING
Tyco Electronics Corporation
300 Constitutional Drive
Menlo Park, CA 94025 USA
TITLE :
SOLDERSLEEVE, MICRO-MINIATURE
CONNECTOR
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO.:
D-141-22
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for their
application.
DATE:
04-Apr.-01
DOC ISSUE:
1
DRAWN BY:
M. FORONDA
CAGE CODE:
06090
REPLACES:
N/A
DCR NUMBER:
D010064
PROD. REV.:
F
SCALE:
None
SIZE:
A
SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
MATERIALS
1. INSULATION SLEEVE: Heat shrinkable, transparent blue, radiation cross-linked polyvinylidene
fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI J-STD-006.
FLUX: TYPE ROL1 per ANSI J-STD-004.
APPLICATION
1. This part is designed for use on micro-miniature connectors having a maximum pin cross-sectional
area envelope of 0.61 (0.024) diameter. The pin length shall be 3.81±0.25 (0.150±0.010).
2. The sleeve will terminate the following wire sizes:
No. of Wires AWG
1 26 (0.91 (0.036) max. insulation dia.)
1 28
1 30
2 28 (0.81 (0.032) max. insulation dia., 0.20 x 0.58 (0.008 x 0.023) pin.
2 30
3. Strip wires to 3.81±0.25 (0.150±0.010).
4. This drawing forms part of Raychem Specification Control Drawing D-713-02.
