[Data Sheet]
If the product is heated during the reflow under the condition of hygroscopic state,
it may vaporize and expand which will influence the performance of the product.
Therefore, the package is waterproof. Please use the product following the conditions:
Bake the product in case of below:
①The expiration date is passed.
②The color of indicator (silica gel) turned from blue to colorless or from green to pink.
2-1.Precaution for Drive System and Off Mode
Design the circuit without the electric load exceeding the ABSOLUTE MAXIMUM RATING that
please do not apply voltage neither forward nor reverse. Especially, for the products with the
Ag-paste used in the die bonding, there’s high possibility to cause electro migration and result
The Derating Characteristics are based on the lifetime of luminous intensity and assumption
of degradation & color change of sealing resin or reflector. About its reliability,
There’s possibility for intensity of light drop according to working conditions and environments
(applied current, surrounding temperature and humidity, corrosive gases), please call our Sales
①Longtime intensity of light life
2-4.Applied Stress on Product
The top of the LED is very soft, which the silicon resin is used as sealing resin.
Therefore, please pay attention to the overstress on it which may influence its reliability.
The Product is LED. We are not responsible for the usage as the diode such as Protection Chip,
Remark
so please try not to apply stress on it.
applies on the products. If drive by constant voltage, it may cause current deviation of the LED and
result in deviation of luminous intensity, so we recommend to drive by constant current.
(Deviation of VF Value will cause deviation of current in LED.) Furthermore, for off mode,
please evaluate its using conditions and environment and use it after confirmed there is no problem.
staffs for inquiries about the concerned application below.
with our desiccant (silica gel)
(Even if the product is within the expiration date.)
・Reel and embossed tape are easy to be deformed when baking,
Rectifier, Switching and so on.
Please storing in the airtight container
②After opening
package
5〜30℃ Below 70%RH Within 72h
Temperature
①Before using 5〜30℃ 30〜70%RH
from Receiving
Storage with waterproof package
[MSL0402RGB series]
■Precaution (Surface Mount Device)
________________________________________________________
www.rohm.com
©2018 ROHM Co., Ltd. All rights reserved
6/9
2018.3 - Rev.008