OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

PC9EB120K

P1-P3P4-P4
PC
www.vishay.com
Vishay Dale
Not for New Designs
Revision: 08-Aug-16
1
Document Number: 34070
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Inductors, Subminiature, Shielded, Radial Leaded
ELECTRICAL SPECIFICATIONS
Inductance tolerance: ± 10 %
Dielectric strength: 840 V
RMS
at sea level
Working voltage: 300 V
DC
Q and SRF values: minimum not less than 80 % of specified
value
Maximum current: based on temperature rise not to
exceed 35 °C at +90 °C ambient
MECHANICAL SPECIFICATIONS
Operating temperature: -55 °C to +125 °C
Terminal pull: 3 pounds
FEATURES
• Classification is grade 1, class B
• Subminiature shielded
• Custom values up to 100 000 μH are available
upon request
• Printed board mounting facilitated by 0.200" [5.08 mm]
grid spacing
• Radial lead fixed inductor
• High Q values
• Unitized epoxy-molded construction
• Shielded construction to allow maximum density
packaging
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DENSITY SPECIFICATIONS
Weight: 1.5 g maximum
Shielding: 3 % coupling maximum when two units are
tested side by side
ENVIRONMENTAL SPECIFICATIONS
Moisture: per MIL-STD-202, method 106
Vibration: low frequency, 10 Hz to 55 Hz at 0.06" [1.52 mm]
maximum total excursion at rate of 1 linear sweep per
minute for 2 h repeated for each of three mutually
perpendicular planes
Shock: 100 g, 6 ms, body mounted
DIMENSIONS in inches [millimeters]
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IND.
(μH)
TOL.
(%)
Q
NOM.
TEST
FREQ.
(MHz)
SRF NOM.
(MHz)
DCR
MAX.
()
RATED DC
CURRENT
(mA)
INCREMENTAL
CURRENT
(mA)
(1)
PC 0.10 ± 10 70 25 > 250 0.030 2500 2500
PC 0.12 ± 10 70 25 > 250 0.030 2500 2500
PC 0.15 ± 10 70 25 > 250 0.030 2500 2500
PC 0.18 ± 10 70 25 > 250 0.035 2400 2400
PC 0.22 ± 10 70 25 > 250 0.038 2300 2300
PC 0.27 ± 10 80 25 > 250 0.040 2200 2200
PC 0.33 ± 10 80 25 > 250 0.040 2200 2200
PC 0.39 ± 10 80 25 250 0.045 2100 2100
PC 0.47 ± 10 80 25 230 0.045 2100 2100
Note
(1)
Incremental current: The DC current required to cause a 5 % reduction in the nominal inductance value.
0.300 ± 0.010
[7.62 ± 0.254]
0.080 ± 0.010
[2.03 ± 0.254]
0.200 ± 0.005
[5.08 ± 0.127]
0.265 ± 0.010
[6.73 ± 0.254] Dia.
0.270 [6.86]
Max.
#24 0.020 ± 0.002
[0.508 ± 0.051] TCW
3/8 ± 1/16
[9.52 ± 1.59]
PC
www.vishay.com
Vishay Dale
Not for New Designs
Revision: 08-Aug-16
2
Document Number: 34070
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PC 0.56 ± 10 80 25 220 0.050 2000 2000
PC 0.68 ± 10 80 25 190 0.055 1900 1900
PC 0.82 ± 10 85 25 180 0.060 1800 1800
PC 1.0 ± 10 85 25 160 0.070 1700 1700
PC 1.2 ± 10 90 7.9 170 0.085 1670 1670
PC 1.5 ± 10 100 7.9 155 0.100 1540 1540
PC 1.8 ± 10 115 7.9 135 0.110 1470 1470
PC 2.2 ± 10 110 7.9 120 0.120 1410 1410
PC 2.7 ± 10 110 7.9 104 0.125 1380 1380
PC 3.3 ± 10 90 7.9 93 0.165 1200 1200
PC 3.9 ± 10 90 7.9 87 0.180 1135 1135
PC 4.7 ± 10 95 7.9 79 0.245 985 985
PC 5.6 ± 10 95 7.9 72 0.265 950 950
PC 6.8 ± 10 85 7.9 63 0.330 853 853
PC 8.2 ± 10 95 7.9 60 0.460 720 720
PC 10 ± 10 90 7.9 54 0.640 620 620
PC 12 ± 10 120 2.5 37 0.800 545 545
PC 15 ± 10 120 2.5 28.8 0.865 520 520
PC 18 ± 10 115 2.5 23.8 0.940 504 504
PC 22 ± 10 125 2.5 21.3 1.03 460 460
PC 27 ± 10 115 2.5 20.6 1.18 418 418
PC 33 ± 10 120 2.5 18.6 1.30 398 398
PC 39 ± 10 120 2.5 17.7 1.41 385 385
PC 47 ± 10 110 2.5 14.9 1.61 350 350
PC 56 ± 10 115 2.5 13.9 2.08 330 333
PC 68 ± 10 105 2.5 12.9 2.20 320 330
PC 82 ± 10 105 2.5 11.7 2.42 300 320
PC 100 ± 10 95 2.5 10.5 2.15 333 300
PC 120 ± 10 95 0.79 5.6 2.38 316 190
PC 150 ± 10 90 0.79 5.2 2.52 306 175
PC 180 ± 10 95 0.79 4.9 2.88 288 150
PC 220 ± 10 95 0.79 4.6 3.18 273 125
PC 270 ± 10 100 0.79 4.2 3.50 260 120
PC 330 ± 10 100 0.79 3.55 4.80 222 110
PC 390 ± 10 100 0.79 3.45 5.44 209 105
PC 470 ± 10 100 0.79 3.2 5.9 201 100
PC 560 ± 10 95 0.79 2.9 6.3 194 90
PC 680 ± 10 100 0.79 2.7 7.2 181 80
PC 820 ± 10 90 0.79 2.5 8.0 172 70
PC 1000 ± 10 100 0.79 2.35 12 141 65
MARKING
- Manufacturer data printed
ORDERING INFORMATION
PC 0.10 μH 10 % EB e2
MODEL INDUCTANCE
VALUE
INDUCTANCE
TOLERANCE
PACKAGE
CODE
JEDEC
®
LEAD (Pb)-FREE
STANDARD
GLOBAL PART NUMBER
PC9 EB R1 0 K
MODEL
PACKAGE
CODE
INDUCTANCE
VALUE
INDUCTANCE
TOLERANCE
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IND.
(μH)
TOL.
(%)
Q
NOM.
TEST
FREQ.
(MHz)
SRF NOM.
(MHz)
DCR
MAX.
()
RATED DC
CURRENT
(mA)
INCREMENTAL
CURRENT
(mA)
(1)
Note
(1)
Incremental current: The DC current required to cause a 5 % reduction in the nominal inductance value.
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 13-Jun-16
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
P1-P3P4-P4

PC9EB120K

Mfr. #:
Buy PC9EB120K
Manufacturer:
Vishay / Dale
Description:
Fixed Inductors PC 12 10% EB E2
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet