VS-60-70MT..KPbF Series
www.vishay.com
Vishay Semiconductors
Revision: 27-Feb-14
2
Document Number: 94356
For technical questions within your region: DiodesAmericas@vishay.com
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS
VALUES
60MT.K
VALUES
70MT.K
UNITS
Maximum DC output
current at case temperature
I
O
120° rect. conduction angle
60 (75) 70 (90) A
85 (61) 85 (57) °C
Maximum peak, one-cycle
forward, non-repetitive
surge current
I
FSM
t = 10 ms
No voltage
reapplied
Initial
T
J
= T
J
maximum
420 480
A
t = 8.3 ms 440 500
t = 10 ms
100 % V
RRM
reapplied
350 400
t = 8.3 ms 370 420
Maximum I
2
t for fusing I
2
t
t = 10 ms
No voltage
reapplied
870 1150
kA
2
s
t = 8.3 ms 790 1050
t = 10 ms
100 % V
RRM
reapplied
610 800
t = 8.3 ms 560 730
Maximum I
2
t for fusing I
2
t t = 0.1 ms to 10 ms, no voltage reapplied 8700 11 300 A
2
s
Low level value of threshold voltage V
F(TO)1
(16.7 % x x I
F(AV)
< I < I
F(AV)
), T
J
maximum 0.85 0.86
V
High level value of threshold voltage V
F(TO)2
(I > x I
F(AV)
), T
J
maximum 1.07 1.08
Low level value of forward slope resistance r
f1
(16.7 % x x I
F(AV)
< I < I
F(AV)
), T
J
maximum 8.04 7.35
m
High level value of forward
slope resistance
r
f2
(I > x I
F(AV)
), T
J
maximum 7.08 6.53
Maximum forward voltage drop V
FM
I
pk
= 100 A, T
J
= 25 °C, t
p
= 400 μs single junction 1.75 1.55
V
RMS isolation voltage V
ISOL
T
J
= 25 °C, all terminal shorted
f = 50 Hz, t = 1 s
4000
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS
VALUES
60MT.K
VALUES
70MT.K
UNITS
Maximum junction operating and
storage temperature range
T
J
, T
Stg
-40 to 150 °C
Maximum thermal resistance,
junction to case
R
thJC
DC operation per module 0.37 0.29
K/W
DC operation per junction 2.22 1.75
120° rect. conduction angle per module 0.40 0.34
120° rect. conduction angle per junction 2.42 2.01
Maximum thermal resistance,
case to heatsink per module
R
thCS
Mounting surface smooth, flat and greased 0.03
Mounting torque ± 10 %
to heatsink
A mounting compound is recommended and
the torque should be rechecked after a period
of 3 hours to allow for the spread of the
compound. Lubricated threads.
4 to 6
Nm
to terminal 3 to 4
Approximate weight 176 g
