OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MAX339EEE+T

P1-P3P4-P6P7-P9P10-P12P13-P13
The MAX338/MAX339 are monolithic, CMOS analog
multiplexers (muxes). The 8-channel MAX338 is
designed to connect one of eight inputs to a common
output by control of a 3-bit binary address. The dual, 4-
channel MAX339 is designed to connect one of four
inputs to a common output by control of a 2-bit binary
address. Both devices can be used as either a mux or
a demux. On-resistance is 400Ω max, and the devices
conduct current equally well in both directions.
These muxes feature extremely low off leakages (less
than 20pA at +25°C), and extremely low on-channel
leakages (less than 50pA at +25°C). The new design
offers guaranteed low charge injection (1.5pC typ) and
electrostatic discharge (ESD) protection greater than
2000V, per method 3015.7. These improved muxes are
pin-compatible upgrades for the industry-standard
DG508A and DG509A. For similar Maxim devices with
lower leakage and charge injection but higher on-resis-
tance, see the MAX328 and MAX329.
The MAX338/MAX339 operate from a single +4.5V to
+30V supply or from dual supplies of ±4.5V to ±20V.
All control inputs (whether address or enable) are TTL
compatible (+0.8V to +2.4V) over the full specified tem-
perature range and over the ±4.5V to ±18V supply
range. These parts are fabricated with Maxim’s 44V sili-
con-gate process.
________________________Applications
Data-Acquisition Systems Sample-and-Hold Circuits
Test Equipment Heads-Up Displays
Military Radios Communications Systems
Guidance and Control Systems PBX, PABX
____________________________Features
o On-Resistance, <400Ω max
o Transition Time, <500ns
o On-Resistance Match, <10Ω
o NO-Off Leakage Current, <20pA at +25°C
o 1.5pC Charge Injection
o Single-Supply Operation (+4.5V to +30V)
Bipolar-Supply Operation (±4.5V to ±20V)
o Plug-In Upgrade for Industry-Standard
DG508A/DG509A
o Rail-to-Rail Signal Handling
o TTL/CMOS-Logic Compatible
o ESD Protection >2000V, per Method 3015.7
Ordering Information
MAX338/MAX339
8-Channel/Dual 4-Channel,
Low-Leakage, CMOS Analog Multiplexers
________________________________________________________________
Maxim Integrated Products
1
CMOS DECODE LOGIC
A2 A1 A0 EN
NO8
NO7
NO6
NO5
NO4
NO3
NO2
NO1
COM
V+ V- GND
MAX338 8-CHANNEL SINGLE-ENDED MULTIPLEXER
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
A1
A2
GND
V+
NO1
V-
EN
A0
TOP VIEW
MAX338
NO5
NO6
NO7
NO8
COM
NO4
NO3
NO2
DIP/SO/QSOP
_____________________Pin Configurations/Functional Diagrams/Truth Tables
19-0272; Rev 4; 4/12
Ordering Information continued at end of data sheet.
*
Contact factory for dice specifications.
**
EP = Exposed Pad
***
Contact factory for availability.
+
Denotes a lead(Pb)-free/RoHS-compliant package.
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Pin Configurations/Functional Diagrams/Truth Tables
continued at end of data sheet.
General Description
PART TEMP RANGE PIN-PACKAGE
MAX338CEE+ 0°C to +70°C
16 QSOP
MAX338CPE+ 0°C to +70°C
16 PDIP
MAX338CSE+ 0°C to +70°C
16 Narrow SO
MAX338C/D 0°C to +70°C
Dice*
MAX338EEE+ -40°C to +85°C
16 QSOP
MAX338ETE+ -40°C to +85°C
16 TQFN-EP**
(5mm x 5mm)
1.5 5T
A
= +25°C
MAX338/MAX339
8-Channel/Dual 4-Channel,
Low-Leakage, CMOS Analog Multiplexers
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = +15V, V- = -15V, V
GND
= 0V, V
AH
= +2.4V, V
AL
= +0.8V, T
A
= T
MIN
to T
MAX
, unless otherwise noted.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Voltage Referenced to V-
V+ ............................................................................-0.3V, 44V
GND .........................................................................-0.3V, 25V
Digital Inputs, NO, COM (Note 1)...........(V- - 2V) to (V+ + 2V) or
30mA (whichever occurs first)
Continuous Current (any terminal) ......................................30mA
Peak Current, NO or COM
(pulsed at 1ms, 10% duty cycle max) ..........................100mA
Continuous Power Dissipation (TA = +70°C)
Plastic DIP (derate 10.53mW/°C above +70°C) ..........842mW
Narrow SO (derate 8.70mW/°C above +70°C) ............696mW
16 QSOP (derate 8.3mW/°C above +70°C)..............666.7mW
16-Pin TQFN (derate 20.8mW/°C above +70°C) ....1666.7mW
CERDIP (derate 10.00mW/°C above +70°C)...............800mW
Operating Temperature Ranges
MAX33_C__ ........................................................0°C to +70°C
MAX33_E__......................................................-40°C to +85°C
MAX33_MJE, MSE .........................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Soldering Temperature (reflow)
Lead(Pb)-free packages..............................................+260°C
Packages containing lead(Pb).....................................+240°C
V
COM
= ±10V,
V
NO
= ±10V,
sequence
each switch
on
V
NO
= +10V,
V
COM
= ±10V,
V
EN
= 0V
V
COM
= +10V,
V
NO
= ±10V,
V
EN
= 0V
I
NO
= 0.2mA,
V
COM
= ±10V
V
NO
= ±10V,
V
COM
= +10V,
V
EN
= 0V
CONDITIONS
nA
-20 20
I
COM(ON)
COM-On Leakage Current
(Note 5)
-1.65 1.65
-0.05 0.008 0.05
-40 40
-3.25 3.25
-0.05 0.006 0.05
nA
-20 20
I
COM(OFF)
COM-Off Leakage Current
(Note 5)
-1.65 1.65
-0.05 0.005 0.05
-40 40
220 400
-3.25 3.25
-0.05 0.005 0.05
nA
-20 20
I
NO(OFF)
NO-Off Leakage Current
(Note 5)
-1.25 1.25
Ω
500
R
ON
On-Resistance
UNITS
MIN TYP MAX
(Note 2)
SYMBOLPARAMETER
Note 1: Signals on NO, COM, EN, A0, A1, or A2 exceeding V+ or V- are clamped by internal diodes. Limit forward current to
maximum current ratings.
V-15 15
V
NO
,
V
COM
Analog Signal Range
I
NO
= 0.2mA,
V
COM
= ±10V (Note 4)
Ω
410
∆R
ON
On-Resistance Matching
Between Channels
(Note 3)
T
A
= +25°C
T
A
= T
MIN
to T
MAX
T
A
= +25°C
-0.02 0.001 0.02T
A
= +25°C
T
A
= T
MIN
to T
MAX
T
A
= +25°C
T
A
= T
MIN
to T
MAX
T
A
= +25°C
T
A
= T
MIN
to T
MAX
T
A
= +25°C
T
A
= T
MIN
to T
MAX
T
A
= +25°C
T
A
= T
MIN
to T
MAX
MAX339
MAX338
MAX339
MAX338
C, E
M
C, E
M
C, E
M
C, E
M
C, E
M
SWITCH
T
A
= T
MIN
to T
MAX
15
MAX338/MAX339
8-Channel/Dual 4-Channel,
Low-Leakage, CMOS Analog Multiplexers
_______________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICS—Dual Supplies (continued)
(V+ = +15V, V- = -15V, V
GND
= 0V, V
AH
= +2.4V, V
AL
= +0.8V, T
A
= T
MIN
to T
MAX
, unless otherwise noted.)
Off Isolation
(Note 6)
dB-75V
ISO
1.5 5Q
Charge Injection
(Note 3)
100 500
ns
750
t
ON(EN)
Enable Turn-On Time
160 500
ns10 140t
OPEN
Break-Before-Make Interval
µA-1.0 1.0I
AL
Input Current with
Input Voltage Low
µA-1.0 0.001 1.0I
AH
Input Current with
Input Voltage High
µA
-10 10
I-Negative Supply Current
-1 1
µA
600
I+Positive Supply Current
290 500
V±4.5 ±20Power-Supply Range
50 100
µA
150
UNITS
MIN TYP MAX
(Note 2)
SYMBOLPARAMETER
Crosstalk Between Channels V
CT
-92 dB
Logic Input Capacitance C
IN
2 pF
NO-Off Capacitance C
NO(OFF)
3 pF
11
COM-Off Capacitance C
COM(OFF)
f = 1MHz,
V
EN
= 0.8V,
V
COM
= 0V,
Figure 8
6
pF
16
COM-On Capacitance C
COM(ON)
f = 1MHz,
V
EN
= 2.4V,
V
COM
= 0V,
Figure 8
9
pF
T
A
= +25°C
V
EN
= 0V or 2.4V,
V
A
= 0V
T
A
= +25°C
V
A
= 2.4V or 15V
T
A
= +25°C
T
A
= T
MIN
to T
MAX
T
A
= T
MIN
to T
MAX
T
A
= +25°C
T
A
= +25°C
T
A
= +25°C
T
A
= T
MIN
to T
MAX
T
A
= +25°C
T
A
= +25°C
T
A
= T
MIN
to T
MAX
CONDITIONS
T
A
= +25°C
T
A
= +25°C
T
A
= +25°C
T
A
= +25°C
T
A
= +25°C
V
EN
= 0V,
R
L
= 1kΩ,
f = 100kHz
C
L
= 100pF,
V
NO
= 0V,
R
S
= 0Ω, Figure 6
Figure 3
V
EN
= 0V or 2.4V,
V
A(ALL)
= 0V, 2.4V or 5V
Figure 4
V
EN
= 2.4V,
V
A(ALL)
= 2.4V
V
EN
= V
A
= 0V
V
EN
= 2.4V,
f = 100kHz,
V
GEN
= 1V
P-P
,
R
L
= 1kΩ, Figure 7
f = 1MHz
f = 1MHz,
V
EN
= V
NO
= 0V,
Figure 8
MAX338
MAX339
MAX338
MAX339
ns200 500t
TRANS
Transistion Time T
A
= +25°CFigure 2
pC
ns
750
t
OFF(EN)
Enable Turn-Off Time
T
A
= T
MIN
to T
MAX
Figure 3
INPUT
SUPPLY
DYNAMIC
P1-P3P4-P6P7-P9P10-P12P13-P13

MAX339EEE+T

Mfr. #:
Buy MAX339EEE+T
Manufacturer:
Maxim Integrated
Description:
Multiplexer Switch ICs 4:1 2Ch Low Leakage CMOS MUX
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet