2005-2016 Microchip Technology Inc. DS20001942G-page 17
MCP9700/9700A and MCP9701/9701A
APPENDIX A: REVISION HISTORY
Revision G (June 2016)
The following is the list of modifications:
1. Added the MCP9700T-H/TT package version.
2. Minor typographical changes.
Revision F (July 2014)
The following is the list of modifications:
3. Updated the Package Type information.
4. Note 4 in the DC Electrical Characteristics table
was added.
5. Updated the Temperature Range in the Product
Identification System section.
6. Added maximum IDD specification for the High
Temperature device.
Revision E (April 2009)
The following is the list of modifications:
1. Added High Temperature option throughout
document.
2. Updated plots to reflect the high temperature
performance.
3. Updated Package Outline drawings.
4. Updated Revision history.
Revision D (October 2007)
The following is the list of modifications:
1. Added the 3-lead SOT-23 devices to data sheet.
2. Replaced Figure 2-15.
3. Updated Package Outline Drawings.
Revision C (June 2006)
The following is the list of modifications:
1. Added the MCP9700A and MCP9701A devices
to data sheet.
2. Added TO92 package for the
MCP9700/MCP9701.
Revision B (October 2005)
The following is the list of modifications:
1. Added Section 3.0 “Pin Descriptions”.
2. Added the Linear Active Thermistor™ IC
trademark.
3. Removed the 2
nd
order temperature equation
and the temperature coeficient histogram.
4. Added a reference to AN1001 and correspond-
ing verbiage.
5. Added Figure 4-2 and corresponding verbiage.
Revision A (November 2005)
• Original release of this document.
