Description
• Low resistance
• Low profile 0603/1608 design
• Pb-free and RoHS Compliant
• High inrush withstand capability
• Polymer matrix design
• One time positive disconnect
• Ampere rating marked on both sides, dual orientation
• Compatible with leaded and lead-free reflow and wave
solder
Agency Information
• UL Recognition Card: JDYX2, E19180
Environmental Data
•Life Test: MIL-STD-202, Method 108A, Test Condition C
• Load Humidity: MIL-STD-202, Method 103B
• Moisture Resistance: MIL-STD-202, Method 106G
• Thermal Shock: MIL-STD-202, Method 107D
• Solderability: ANSI/J-STD-002, Test B
• Mechanical Shock: MIL-STD-202, Method 213B,
Condition A
• High Frequency Vibration: MIL-STD-202, Method 204D,
Condition D
Packaging & Ordering Information
• 5,000 pieces; paper tape; 178mm (7 inch) reel;
per EIA Standard 481-1
• Order by Product Code (no prefix or suffix necessary)
Soldering Method
• Wave Solder: 260°C, 10 sec max.
• Infrared: 260°C, 30 sec max.
Land Pattern
Dimensions
mm
⁄(inches)
ELECTRICAL CHARACTERISTICS
% of Amp Rating Opening Time
100% 4 Hours Minimum
200% 5 Seconds Maximum
SPECIFICATIONS
Product Voltage Rating Interrupting Typical DC Cold Typical Melting Alpha
Code AC/DC Rating @ Resistance I
2
t (A
2
s)*** Code
Rated Voltage* (ohms)**
PC06F500MA 32V 50A 0.143 0.00128 F
PC06F750MA 32V 50A 0.088 0.00291 G
PC06F1A 32V 50A 0.065 0.00616 H
PC06F1.5A 32V 50A 0.042 0.02565 K
PC06F2A 32V 50A 0.027 0.03968 N
PC06F2.5A 32V 50A 0.021 0.10139 O
PC06F3A 32V 50A 0.018 0.15778 P
PC06F3.5A 32V 50A 0.014 0.25844 R
PC06F4A 32V 50A 0.012 0.27034 S
* DC Interrupting Rating is measured at designated voltage, time constant of less than 50 microseconds, battery source.
** DC cold resistance is measured at less than 10% of rated current.
***Melting I
2
t is measured with a battery back at rated DC voltage, at the lesser of either 10 times rated current or the interrupting rating with a time constant of less than 50
microseconds.
PolyCHIP
™
Fuses
PC06F Series, Fast Acting
