Turns DCR DCR
Package/ Matched
Part Number Ratio OCL L
L CW/W
pri sec
Schematic To
(±3%) (mH MIN) (µH MAX) (pF MAX) (Ω MAX) (Ω MAX)
PE-65535 1:2CT 20.0 5.0 130 2.65 5.0 IS/5
EXAR XR6164
XR-T6165, XR-T6166
PE-65540 1CT:1 10.0 5.0 100 2.60 2.6 IS/6 –
T7015 1:2CT & 1:2CT 20.0 5.0 130 2.80 5.6 AN/1 –
64 KBPS INTERFACE
TRANSFORMERS
Designed for G.703 Codirectional Interface
Mechanicals
Single and dual transformer modules for
ITU G.703 codirectional applications
Transformers matched to the integrated circuit
Provide 1500 Vrms minimum isolation
Schematics
IS
AN
For More Information :
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners.
Printed on recycled paper. ©2003, Pulse Engineering, Inc.
T611.C (1/03)
Electrical Specifications @ 25°C — Operating Temperature 0°C to 70°C
The CCITT recommendations G.703 describe the physical and
electrical characteristics of digital interfaces at 64 Kbps.
PE-65535 listed above has been designed for the codirectional
interface and matches the driver/receiver chips from EXAR
(XR6164, XR-T6165, and XR-T6166). The characteristics of
these transformers allow the pulse to comply with the pulse
masks in the 120 Ω system.
Note: Unused pins not provided.
Leads are 22 AWG solderable.
Weight . . . . . . . . . .4 grams
Tube . . . . . . . . . . . . .35/tube
Dimensions:
Inches
mm
Unless otherwise specified,
all tolerances are ±
.010
0,25
Dimensions:
Inches
mm
Unless otherwise specified,
all tolerances are ±
.010
0,25
Weight . . . . . . . . .4.0 grams
Tape & Reel . . . . . .250/reel
Tube . . . . . . . . . . . .30/tube