5
Absolute Maximum Ratings T
A
= 25
o
C Thermal Information
Supply Voltage, AV
CC
or DV
CC
to AGND or DGND . . . . . . . . . . .6V
DGND to AGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3V
Digital I/O Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DGND
to DV
CC
Analog I/O Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . AGND to AV
CC
Operating Conditions
Temperature Range
HI5767/xCx. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0
o
C to 70
o
C
HI5767/xIx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40
o
C to 85
o
C
Thermal Resistance (Typical, Note 1)
JA
(
o
C/W)
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
SSOP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . 150
o
C
Maximum Storage Temperature Range . . . . . . . . .-65
o
C to 150
o
C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . .300
o
C
(SOIC - Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1.
JA
is measured with the component mounted on an evaluation PC board in free air.
Electrical Specifications AV
CC
= DV
CC1
= 5.0V, DV
CC2
= 3.0V; V
REFIN
= V
REFOUT
; f
S
= 40MSPS at 50% Duty Cycle;
C
L
= 10pF; T
A
= 25
o
C; Differential Analog Input; Typical Values are Test Results at 25
o
C,
Unless Otherwise Specified
PARAMETER TEST CONDITIONS MIN TYP MAX UNITS
ACCURACY
Resolution 10 - - Bits
Integral Linearity Error, INL f
IN
= 1MHz Sinewave - 0.75 1.75 LSB
Differential Linearity Error, DNL
(Guaranteed No Missing Codes)
f
IN
= 1MHz Sinewave - 0.35 1.0 LSB
Offset Error, V
OS
f
IN
= DC -40 - 40 LSB
Full Scale Error, FSE f
IN
= DC - 4 - LSB
DYNAMIC CHARACTERISTICS
Minimum Conversion Rate No Missing Codes - 0.5 1 MSPS
Maximum Conversion Rate
HI5767/2 No Missing Codes 20 - - MSPS
HI5767/4 No Missing Codes 40 - - MSPS
HI5767/6 No Missing Codes 60 - - MSPS
Effective Number of Bits, ENOB
HI5767/2 f
S
= 20MSPS, f
IN
= 10MHz 8.7 9 - Bits
HI5767/4 f
S
= 40MSPS, f
IN
= 10MHz 8.55 8.8 - Bits
HI5767/6 f
S
= 60MSPS, f
IN
= 10MHz 8.1 8.4 - Bits
Signal to Noise and Distortion Ratio, SINAD
HI5767/2 f
S
= 20MSPS, f
IN
= 10MHz - 55.9 - dB
HI5767/4 f
S
= 40MSPS, f
IN
= 10MHz - 54.7 - dB
HI5767/6 f
S
= 60MSPS, f
IN
= 10MHz - 53.8 - dB
Signal to Noise Ratio, SNR
HI5767/2 f
S
= 20MSPS, f
IN
= 10MHz - 55.9 - dB
HI5767/4 f
S
= 40MSPS, f
IN
= 10MHz - 55 - dB
HI5767/6 f
S
= 60MSPS, f
IN
= 10MHz - 54 - dB
Total Harmonic Distortion, THD
HI5767/2 f
S
= 20MSPS, f
IN
= 10MHz - -71 - dBc
RMS Signal
RMS Noise + Distortion
--------------------------------------------------------------=
RMS Signal
RMS Noise
-------------------------------=
HI5767
