Low Voltage 1.65 V to 3.6 V, Bidirectional
Logic Level Translation, Bypass Switch
Data Sheet
ADG3233
Rev. C Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2003–2015 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
Operates from 1.65 V to 3.6 V supply rails
Bidirectional level translation, unidirectional signal path
8-lead SOT-23 and MSOP packages
Bypass or normal operation
Short circuit protection
APPLICATIONS
JTAG chain bypassing
Daisy-chain bypassing
Digital switching
FUNCTIONAL BLOCK DIAGRAM
A1 Y1
Y2
A2
GND
ADG3233
V
CC1
V
CC2
V
CC1
V
CC1
V
CC1
V
CC2
V
CC2
EN
0
1
03297-001
Figure 1.
GENERAL DESCRIPTION
The ADG3233
1
is a bypass switch designed on a submicron
process that operates from supplies as low as 1.65 V. The device
is guaranteed for operation over the supply range 1.65 V to 3.6 V. It
operates from two supply voltages, allowing bidirectional level
translation, that is, it translates low voltages to higher voltages
and vice versa. The signal path is unidirectional, meaning data
may only flow from A → Y.
This type of device may be used in applications that require a
bypassing function. It is ideally suited to bypassing devices in
a JTAG chain or in a daisy-chain loop. One switch could be
used for each device or a number of devices, thus allowing
easy bypassing of one or more devices in a chain. This may
be particularly useful in reducing the time overhead in testing
devices in the JTAG chain or in daisy-chain applications where
the user does not wish to change the settings of a particular device.
The bypass switch is packaged in two of the smallest footprints
available for its required pin count. The 8-lead SOT-23 package
requires only 2.9 mm × 2.8 mm board space, while the MSOP
package occupies approximately 3 mm × 4.9 mm board area.
PRODUCT HIGHLIGHTS
1. Bidirectional level translation matches any voltage level
from 1.65 V to 3.6 V.
2. The bypass switch offers high performance and is fully
guaranteed across the supply range.
3. Short circuit protection.
4. Tiny 8-lead SOT-23 package and 8-lead MSOP.
Table 1. Truth Table
EN
Signal Path Function
L
A1 → Y2, Y1 → V
CC1
Enable bypass mode
H
A1 → Y1, A2 → Y2
Enable normal mode
1
U.S. Patent Number: 7,369,385 B2.