RACD60-4200A Datasheet RACD60-4200A, RACD60-2500A, RACD60-1200A | P1-P2

RACD60-A

RoHS

2011/65/EU

6/6

LIGHTLINE

AC/DC-Converter

with 5 year Warranty

60 Watt PFC

Single

Output

Selection Guide

Input Voltage Range 90-305 VAC

Input Frequency Range 47-63Hz

Power Factor (Full Load) 120VAC >0.98

240VAC >0.94

277VAC >0.92

THD Full Load, 115VAC 12% max.

Full Load, 230VAC 18% max.

DC Dimming DC 1-10V

PWM Dimming Puls: Hi=10V Low=0V, Duty: 10% - 100%, Fsw 0.5 - 3KHz

Resistance Dimming 10K - 100K Ω

Current Accuracy ±5%

AC Input Current 100-240VAC 0.8A

277VAC 0.4A

Inrush Current (Cold Start) 240VAC 70A

Leakage Current <0.5mA / 240VAC

Start-up Time (at Full Load) <2sec

Isolation Voltage 3.75kVAC / 1 minute

Short Circuit Protection Hiccup

Over Voltage Protection 12V 13.2 - 15.6V

24V 26.4 - 31.2V

36V 39.6 - 46.8V

48V 52.8 - 62.4V

57V 62.7 - 70V

Over Temperature Protection 105 ± 10°C, Latch Mode

Vibration 10-500Hz, 2G, 60 Min. along X, Y and Z

Storage Humidity 10% - 90% RH

Operating Humidity 20% - 90% RH Non-Condensing

Weight 420g

Operating Temperature -30°C to +50°C

Storage Temperature -40°C to +60°C

Ripple & Noise 12V, 24V 200mV

(at 20MHz bandwidth using 0.1uF & 47uF capacitor) 36V, 48V, 57V 250mV

IP Rating IP67

Isolation Resistance 100MΩ / 500VDC at 25°C

Dimension (L*W*H) 179*45.1*32.5mm

Design Lifetime 70 x 10³ hours max.

MTBF (+25°C) using MIL-HDBK 217F 200 x 10³ hours min.

continued on next page

Specifications (measured at 230VAC and 25°C ambient temperature)

● Universal AC Input

● Constant Current Operation

● Suitable for High Brightness LED Products

● Built-In Active PFC Function

● Overvoltage-, Short Circuit- and Over-

temperature Protection

● Built-In 3 in 1 Dimming

● IP67 Rated

● Class 2 Power Unit UL1310

Features

LED DRIVER

Part Output Rated Rated Output Efficiency

Number Voltage Power Current Voltage Range

(VDC) (W) (mA) (V) (typ.)

RACD60-1050A 57 60 105 - 1050 40 - 57 88%

RACD60-1200A 48 58 120 - 1200 33 - 48 88%

RACD60-1650A 36 60 165 - 1650 24 - 36 87%

RACD60-2500A 24 60 250 - 2500 15 - 24 86%

RACD60-4200A 12 50 420 - 4200 9 - 12 86%

EN 61347-1 Certified

EN 61347-2-13 Certified

UL8750 Certified

100%

20%

40%

60%

75%

-30 0 20 6550

Ambient Temperature (°C)

Load

90%

230VAC only

E340696

Refer to Application Notes

Derating-Graph

(Ambient Temperature)

Note:

All LED Drivers may not be used without a load.

They must be switched on the primary side only.

Noncompliance may damage the LED or reduce

its lifetime.

L-54 www.recom-power.comREV: 0/2015

RACD60-A

Specifications (measured at 230VAC and 25°C ambient temperature)

RACD60-A

Series

LIGHTLINE

AC/DC-Converter

Safety Standards LED Lighting Safety Report: E340696 UL8750

LED Lighting Safety (Canada) Report: E340696 cUL8750

Class 2 Power Supply Safety Report: E340696 UL1310

Extra Low-Voltage Class 2 Output Report: E340696 CSA C22.2 No. 223-M91

LED equipment for lighting application Report: E340696 CSA C22.2 No. 250.13-12

EN61347-1

EN61347-2-13

EN61000-3-2 Class C

EN61000-3-3

EN61000-4-2,3,4,5,6,8,11

EN61547

EN55015 FCC15

3 in 1 Dimming Control (DC / PWM / Resistance)

10K-100K Resistor Dimmable (Typical):

Resistor Single-Driver

10K 20K 30K 40K 50K 60K 70K 80K 90K 100K

Multi-Driver 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N

Iout (%) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

The length of extended wire for DIM+/- shall not exeed 20 meters. (wire ≤ 20m)

N = The number of dimmer drivers should not exceed 15. (N ≤ 15mS)

DC: 10V / PWM Dimmable (Typical)

DC: 1-10V Dimmable (Typical)

0246810

100

Control Voltage (V)

Output Current (%)

0 20 40 60 80 100

100

Duty Cycle (%)

Output Current (%)

14 16 18 20 22 24

Output Voltage (V)

Efficiency (%)

110 VAC

277 VAC

230 VAC

Efficiency vs Load over Vin

RACD60-2500A

Package Style & Pinning

Typical Characteristics

164 fixing center

45.1

AC IN

DC OUT

+DIM

fixing

center

3.5

0.8

BOTTOM

TOP

32.5

AC Side

0.8

DC Side

0.8

35.7

170±15

160±15

V+ (Red)

V- (Black)

Dim+ (Blue)

Dim- (White)

AC N (Blue)

AC L (Brown)

170±15

160±15

Note: Dim- and V- are internally connected

www.recom-power.com L-55REV: 0/2015

The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit

written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer

shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.

Maximum Number of LED drivers per circuit breakers

Condition Circuit Breaker Circuit Breaker Current

Typ 10A 16A 20A 25A

115VAC, 1Ohm

90° phase angle

C 12 20 24 31

230VAC, 1Ohm

90° phase angle

B 13 21 25 32

C 21 35 41 51

277VAC, 1Ohm

90° phase angle

B 15 24 29 37

C 24 40 47 58

P1-P2

RACD60-4200A

Mfr. #:

Buy RACD60-4200A

Manufacturer:

RECOM Power

Description:

LED Power Supplies 60W 90-305Vin 4200mA AC/DC LED

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

RACD60-4200A

RACD60-4200A

Products related to this Datasheet