Long life, Downsized, 125
℃
Please refer to "Product code guide (radial lead type)"
Sleeve (PET : Brown)
L' 15min. 4min.
φ
D'
φ
d
Vent
F±0.5
◆DIMENSIONS [mm]
◆PART NUMBERING SYSTEM
φ
D
φ
d
F
φ
D'
L'
12.5 14.5 16 18
0.6 0.8 0.8 0.8
5.0 7.5 7.5 7.5
φ
D+0.5max.
L+1.5max.
Gas escape end seal
Terminal Code : E
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 470
µ
F:471, 1,000
µ
F:102)
Lead forming·taping code
Terminal code
Voltage code (ex. 25V:250, 50V:500)
Series code
Category
E GPA A A A E A A A A A A A A SM
8
1
15 16 17
14
18
11 12 13
5 6 7
2 3 4 9 10
Higher temperature
Downsized
Higher ripple current
GPA
LXZ
GXE
●
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
(1/3)
◆SPECIFICATIONS
Items Characteristics
(at 20
℃
, 120Hz)
(at 20
℃
, 1 minute)
(at 20
℃
, 120Hz)
(at 120Hz)
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tan
δ
)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
-
40 to +125
℃
25 to 100V
dc
±20% (M)
I=0.03CV or 4
µ
A, whichever is greater.
Where, I : Max. leakage current (
µ
A), C : Nominal capacitance (
µ
F), V : Rated voltage (V)
When nominal capacitance exceeds 1,000
µ
F, add 0.02 to the above value for each 1,000
µ
F increase.
The following specifications shall be satisfied when the capacitors are restored to 20
℃
after subjected to DC voltage with the rated ripple
current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours (3,000 hours for 25L and less) at 125
℃
.
Capacitance change ≦±30% of the initial value
D.F. (tan
δ
) ≦300% of the initial specified value
Leakage current ≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20
℃
after exposing them for 1,000 hours at 125
℃
without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ≦±30% of the initial value
D.F. (tan
δ
) ≦300% of the initial specified value
Leakage current ≦The initial specified value
Rated voltage (Vdc)
tan
δ
(Max.)
Rated voltage (V
dc)
Z(
-
25
℃
)/Z(+20
℃
)
Z(
-
40
℃
)/Z(+20
℃
)
2
4
2
4
2
4
2
4
2
4
2
4
GPA
S
e
r
i
e
s
Upgrude!
CAT. No. E1001M
●
Downsized, low impedance and high-ripple current version of GXE
series
●
Specified ESR after endurance test
●
For high ripple current automotive applications.
(Direct fuel injection and electric power steering etc.)
●
Endurance with ripple current : 3,000 to 5,000 hours at 125
℃
●
Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
●
RoHS Compliant
25V 35V 50V 63V 80V 100V
25V 35V 50V 63V 80V 100V
0.14 0.12 0.10 0.10 0.08 0.08
Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations.