Ordering Information Product Code
Passive Probe for WR6000 Series Oscilloscopes PP007-WR-1
Passive Probe for WS400 Series Oscilloscopes PP007-WS-1
Basic Adapter Kit PK701
Advanced Adapter Kit PK702
SMD Adapter Kit PK703
Micro Clip Kit PK704
Instruction Manual PP007-OM-E
Sales and Service
Throughout
the World
Corporate
Headquarters
700 Chestnut Ridge Road
Chestnut Ridge, NY 10977
USA
www.lecroy.com
LeCroy Sales Offices:
China: Beijing
Phone (86) 10 8526 1618
Fax (86) 10 8526 1619
France: Les Ulis
Phone (33) 1 6918 8320
Fax (33) 1 6907 4042
Germany: Heidelberg
Phone (49) 6221 827 00
Fax (49) 6221 834 655
Hong Kong
Phone (852) 2834 5630
Fax (852) 2834 9893
Italy: Venice
Phone (39) 041 599 7011
Fax (39) 041 456 9542
Japan: Osaka
Phone (81) 6 6396 0961
Fax (81) 6 6396 0962
Japan: Tokyo
Phone (81) 3 3376 9400
Fax (81) 3 3376 9587
Korea: Seoul
Phone (82) 2 3452 0400
Fax (82) 2 3452 0490
Singapore
Phone (65) 6442 4880
Fax (65) 6442 7811
Sweden: Stockholm
Phone (46) 8 580 143 45
Fax (46) 8 580 143 45
Switzerland: Geneva
Phone (41) 22 719 2228 (North)
Phone (41) 22 719 2175 (South)
Fax (41) 22 719 2230
U.K.: Abingdon
Phone (44) 1 235 536 973
Fax (44) 1 235 528 796
U.S.A.: Chestnut Ridge
Phone (1) 845 578 6020
Fax (1) 845 578 5985
DSPP007
PDF 8/04
© 2004 by LeCroy Corporation. All rights reserved.
LeCroy, ActiveDSO, ProBus, SMART Trigger, JitterTrack, WavePro, WaveMaster, and Waverunner are registered trademarks of LeCroy
Corporation. Information in this publication supersedes all earlier versions. Specifications subject to change without notice.
for the probe to connect to. Used with the
ground blade, this method provides an
ideal ground connection for probing signals
with high frequency content.
For applications which require the flexibility
of a longer ground lead without compromising
high frequency performance, the optional
HF-compensated ground lead (PK007-030)
provides a solution. A passive network in
the lead itself reduces the loading effect of
any resonance.
Ease in Probing SMT Circuits
In addition to the small probe head size, the
PP007 is augmented with several accessories
to simplify probing dense surface mounted
circuit assemblies. Insulating probe caps with
guide fingers (PK007-009, 010, 011, 012) keep
the small probe tip centered on the IC lead
and prevent it from shorting to adjacent
leads. The IC Caps are supplied in a range
of sizes designed for IC lead pitches from
0.5 mm through 1.27 mm.
Optional accessory kits contain 0.5 mm micro
clips for attaching to the smallest IC leads,
along with adapter leads to connect to the
probe tip.
Rugged Probe for Everyday Use
Unlike some probes, the PP007 does not
trade off physical robustness to obtain
excellent high frequency performance.
The probe will stand up to the rigors of
everyday use.
The probe has a working voltage rating of
400VCAT I with transient surges up to 1250 V.
EN61010-31-2 Installation category I (CAT I) is
for probing circuits which are isolated from
the power mains through a power supply
transformer—the most common circuits
measured with oscilloscopes. The probe
also is rated fora CAT II working voltage
of 300 V. CAT II circuits are on the primary
side of power converters and similar
power line connected circuits which are
not intended to be permanently connected
to building wiring.
The probe tip is mounted in a socket, allowing
user replacement should it ever break.
Ordering the Correct Model
The PP007 is supplied in two models, each
optimized to give the best performance
with a specific family of oscilloscope. The
PP007-WR is designed to be used with the
WaveRunner 6000 series, while the PP007-WS
is designed for the WaveSurfer 400 series
oscilloscopes. The physical design of the
probes are identical. All of the connection
accessories, standard and optional, will fit
both models.
Ground Blade Used with Copper Foil
