TSH193
Taiwan Semiconductor
1 Version: B1608
Pull-up Resistor Integrated Hall Effect Latch
DESCRIPTION
TSH193 Hall-effect sensor is a temperature stable,
stress-resistant sensor. Superior high-temperature
performance is made possible through a dynamic
offset cancellation that utilizes chopper-stabilization.
This method reduces the offset voltage normally
caused by device over molding, temperature
dependencies, and thermal stress.
TSH193 includes the following on a single silicon chip:
voltage regulator, Hall voltage generator, small-signal
amplifier, chopper stabilization, Schmitt trigger, Pull-up
resistor output. Advanced DMOS wafer fabrication
processing is used to take advantage of low-voltage
requirements, component matching, very low input-
offset errors, and small component geometries.
This device requires the presence of both south and
north polarity magnetic fields for operation. In the
presence of a south polarity field of sufficient strength,
the device output sensor on, and only switches off
when a north polarity field of sufficient strength is
present.
FEATURES
● Chopper stabilized amplifier stage.
● Optimized for BLDC motor applications.
● Reliable and low shifting on high Temp condition.
● Pull-up resistor integrated
● ESD Protection >4kV HBM
● Compliant to RoHS Directive 2011/65/EU and in
accordance to WEEE 2002/96/EC
● Halogen-free according to IEC 61249-2-21
definition
APPLICATION
● High temperature fan motor
● 3 phase BLDC motor application
● Speed sensing, position sensing
● Revolution counting
● Solid-state switch
● Angular position detection
● Proximity detection
1. V
CC
2. Ground
3. Output
1. V
CC
2. Output
3. Ground
Notes: Moisture sensitivity level: level 3. Per J-STD-020
TYPICAL APPLICATION CIRCUIT