ECONOLINE
DC/DC-Converter
with 3 year Warranty
R1SE
Selection Guide
1 Watt SMD
Isolated
Single Output
Derating-Graph
(Ambient Temperature)
●
1 : 1 Input Range
●
SMD Package
●
Efficiency up to 75%
●
1kVDC Isolation
●
Operating Temperature from -40°C to +85°C
●
UL Certified
Features
Unregulated
Converter
tPart Input Output Output Efficiency Max. Capacitive
Number Voltage Voltage Current typ. Load
SMD (VDC) (VDC) (mA) (%)
R1SE**-0505* 5 5 200 75 1000µF
* add suffix -R for tape & reel packing
Refer to Application Notes
Specifications
(
measured at T
A
= 25°C, nominal input voltage full load and after warm up)
Input Voltage Range ±10% max.
Voltage set Accuracy 100% Load/nominal Vin -2% typ. / ±5% max.
Line Regulation Low Line to High Line @ max. Load 1.2% typ.
Load Regulation (10% to 100% Load) 10% typ. / 15% max.
Ripple & Noise @ 20MHz BW 68mVp-p typ. / 100mVp-p max.
Efficiency 100% Load 70% min. / 75% max.
Operating Temperature -40°C to + 85°C
Storage Temperature -55°C to +125°C
Isolation Test Voltage (tested for 1 second) 1000VDC
(rated for 1 minute***) 500VAC / 60Hz
Isolation Capacitance 75pF max.
Isolation Resistance Viso = 500V 10 GΩ min.
Humidity 95% max.
Operating Frequency Vin (nom.) 20kHz min. / 70 kHz max.
Short-Circuit Protection 1 Second
Weight 1.0g
MTBF Using MIL-HDBK 217F (+90°C) 172 x 10³ hours
Using MIL-HDBK 217F (+25°C) 1022 x 10³ hours
Detailed Information see Application Notes chapter „MTBF“
Certification
UL General Safety Report: E358085-A2 UL60950-1
RoHS
2011/65/EU
6/6
** without marking denotes 5 pins out of 8 fitted
with marking 8 denotes 8 pins out of 8 fitted
Case and Pinning Options
***Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer
to our Application Notes.
UL-60950-1 Certified
E358085
REV: 1/2016 www.recom-power.comE-30