2900376

PHOENIX CONTACT Inc., USA Page 1 / 6
http://www.phoenixcon.com Aug 24, 2011
Extract from the online
catalog
PLC-OPIT- 24DC/ 24DC/2/ACT
Order No.: 2900376
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2900376
PLC actuator interface, consisting of PLC-BPIT...ACT basic terminal
block with Push-In connection and pluggable miniature optocoupler,
for assembly on DIN rail NS 35/7.5, input: 24 V DC, output: 3-33 V
DC/3 A
Commercial data
GTIN (EAN)
4 046356 506878
sales group G247
Pack 10 pcs.
Customs tariff 85364190
Catalog page information Page 87 (IF-2011)
Product notes
WEEE/RoHS-compliant since:
05/05/2009
http://
www.download.phoenixcontact.com
Please note that the data given
here has been taken from the
online catalog. For comprehensive
information and data, please refer
to the user documentation. The
General Terms and Conditions of
Use apply to Internet downloads.
Technical data
Input data
Nominal input voltage U
N
24 V DC
Input voltage range in reference to U
N
0.8 ... 1.2
Switching threshold "0" signal in reference to U
N
≤ 0.4
PLC-OPIT- 24DC/ 24DC/2/ACT Order No.: 2900376
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2900376
PHOENIX CONTACT Inc., USA Page 2 / 6
http://www.phoenixcon.com Aug 24, 2011
Switching threshold "1" signal in reference to U
N
≥ 0.8
Typical input current at U
N
8.5 mA
Typical response time 20 µs (at U
N
)
Typical turn-off time 300 µs (at U
N
)
Operating voltage display Yellow LED
Type of protection Protection against polarity reversal
Free-wheeling diode
Protective circuit/component Polarity protection diode
Damping diode
Transmission frequency 300 Hz
Output data
Output nominal voltage range 3 V DC ... 33 V DC
Limiting continuous current 3 A (see derating curve)
Maximum inrush current 15 A (10 ms)
Voltage drop at max. limiting continuous current ≤ 200 mV
Output circuit 2-wire, floating
Type of protection Protection against polarity reversal
Surge protection
Protective circuit/component Polarity protection diode
Connection data
Connection method Push-In connection
Stripping length 8 mm
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section stranded min. 0.14 mm²
Conductor cross section stranded max. 2.5 mm²
Conductor cross section AWG/kcmil min. 26
Conductor cross section AWG/kcmil max 14
General data
Width 6.2 mm
Height 80 mm
Depth 94 mm
Ambient temperature (operation) -25 °C ... 60 °C
Ambient temperature (storage/transport) -25 °C ... 70 °C
PLC-OPIT- 24DC/ 24DC/2/ACT Order No.: 2900376
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2900376
PHOENIX CONTACT Inc., USA Page 3 / 6
http://www.phoenixcon.com Aug 24, 2011
Mounting position Any
Assembly instructions In rows with zero spacing
Operating mode 100% operating factor
Inflammability class acc. to UL 94 V0
Pollution degree 2
Surge voltage category III
Certificates / Approvals
Certification CUL, CUL Listed, UL, UL Listed
Accessories
Item Designation Description
Assembly
0801762 NS 35/ 7,5 CU UNPERF
2000MM
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35
mm, length: 2 m
0801733 NS 35/ 7,5 PERF 2000MM DIN rail, material: steel galvanized and passivated with a thick
layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm
0801681 NS 35/ 7,5 UNPERF 2000MM DIN rail, material: Steel, unperforated, height 7.5 mm, width 35
mm, length: 2 m
0801377 NS 35/ 7,5 V2A UNPERF
2000MM
DIN rail, Width:35 mm, Height:7.5 mm, Length:2000 mm,
Color:silver
1201756 NS 35/15 AL UNPERF 2000MM DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick,
material: aluminum, height 15 mm, width 35 mm, length 2000 mm
1201895 NS 35/15 CU UNPERF 2000MM DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15
mm, width 35 mm, length: 2 m
1201730 NS 35/15 PERF 2000MM DIN rail, material: steel galvanized and passivated with a thick
layer, perforated, height 15 mm, width 35 mm, length: 2000 mm
1201714 NS 35/15 UNPERF 2000MM DIN rail, material: Steel, unperforated, height 15 mm, width 35
mm, length: 2 m
1201798 NS 35/15-2,3 UNPERF 2000MM DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15
mm, width 35 mm, length: 2 m
2966841 PLC-ATP BK Separating plate, 2 mm thick, required at the start and end of a
PLC terminal strip. Furthermore, it is used for: visual separation
of groups, safe isolation of different voltages of neighboring PLC
relays in acc. with DIN VDE 0106-101, isolation

2900376

Mfr. #:
Manufacturer:
Phoenix Contact
Description:
Solid State Relays - Industrial Mount PLC-OPT- 24DC/ 24DC/2/ACT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet