B170
HNC Series●2.5mm Pitch Connector for Discrete Wire Connection
■Product Specifications
Current rating
(Note 1)
Voltage rating
22 AWG : 3A
24 AWG : 3A
26 AWG : 2A
28 AWG : 1A
30 AWG : 0.5A
250V AC
Storage Temperature Range
Storage
Humidity
Range
Operating Temperature Range
Operating Humidity Range
-10 to +60ç (Note 3)
-40 to 70% (Note 3)
-55 to +85ç (Note 2)
-20 to 80%
Item Specification Condition
1. Insulation Resistance
100
0M
Ω
min. 500V DC
2. Withstanding voltage No flashover or insulation breakdown. 1000V AC/1 minute
3. Contact Resistance 10mΩ Max Measured at a maximum of 20V, 1mA (DC or 1000Hz)
4.
Insertion/Extraction Force
Insertion force : 4.4N max. Extraction force : 0.4N min. Measure at the square steel pin of 0.635
±
0.002mm
5. Vibration No electrical discontinuity of 10μs or more
10 cycles in each of three axis at frequency 10-55Hz, half amplitude 0.75mm
6.
Humidity (Steady state)
Contact resistance : 10mΩ max. Insulation resistance : 1000MΩ min.
96 hours at temperature of 40±2ç and humidity of 90% to 95%
7. Temperature Cycle
Contact resistance : 10mΩ max. Insulation resistance : 1000MΩ min.
(-55
ç
: 30 minutes ➝ 5 to 35
ç
: 2 to 3 minutes
(-85ç : 30 minutes ➝ 5 to 35ç : 2 to 3 minutes) 5 cycles
8.
Durability (Mating/un-mating)
Tin plating : Contact resistance : 30mΩ max. Tin plating : 30 cycles
Gold plating : Contact resistance : 20mΩ max. Gold plating : 50 cycles
9.
Resistance to Soldering heat
No deformation of components affecting performance.
Flow : 250ç for 5 seconds
Manual soldering : 300ç for 2 seconds
Rating
■Materials / Finish
Product Part Material Finish Remarks
Crimping Socket Insulator Polyamide Black UL94V-2
Contact Contact Phosphor Bronze Tin plated or gold plated –––––
Insulator Polyamide Black UL94V-2
Pin Header
Contact Brass Tin plated or gold plated –––––
Note 1 : The rated current will be changed according to cable sizes for use. The header rating only t is 3A.
Note 2 : Includes temperature rise caused by current flow.
Note 3 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 4 : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
■Product Number Structure
●Crimping Plug
●Contact
HNC 2
-
2.5 P - * DSL
q e
e
rwyt
HNC
-
2.5S - C - A
qw
q Series Name : HNC
w Series No. : 2, 1
e Contact Pitch : 2.5mm
r Connector Type
S : Socket
P : Pin Header
t
Number of Contacts :
2 to 8,10,12,15
y
Contact Type
None : Crimping socket
DS : Straight
DSL : Right angle
q Type: 2.5mm pitch socket
w Packaging Type
C : Reel
D : Bag
e
Applicable cable size
A : 22 to 26 AWG
B : 26 to 30 AWG
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
