VJ Safety Certified Capacitors X7R
www.vishay.com
Vishay Vitramon
Revision: 07-Jul-16
1
Document Number: 45020
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount Multilayer Ceramic Chip Capacitors
for Safety Certified Applications
FEATURES
• Approved IEC 60384-14
• Specialty: safety certified capacitors
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
• Power supplies
• Facsimile and telephone
• AC equipment and appliances
• Lighting strike and voltage surge protection
• EMI and AC line filtering
•Isolators
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range X1 / Y2
(1)
: 100 pF to 4.7 nF
Capacitance Range X2
(1)
: 100 pF to 12 nF
Voltage Range: 250 V
AC
Temperature Coefficient of Capacitance (TCC):
± 15 % from -55 °C to +125 °C, with 0 V
DC
applied
Dissipation Factor (DF)
(1)
:
C < 100 pF: 8 % maximum
C 100 pF: 2.5 % maximum
Note
(1)
Test conditions per IEC 60384-14:
Voltage: 1.0 V
RMS
C < 100 pF at 1 MHz
C 100 pF at 1 kHz
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Voltage Proof Test:
X1 / Y2: min. 1500 V
AC
X2: min. 1075 V
DC
Peak Impulse Voltage:
X1 / Y2: 5000 V
X2: 2500 V
Climatic Category According to EN60068-1:
55/125/21