OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MG2040MUTAG

P1-P3P4-P6P7-P8
© Semiconductor Components Industries, LLC, 2014
June, 2014 − Rev. 4
1 Publication Order Number:
MG2040/D
MG2040, SZMG2040
ESD Protection Diodes
Low Capacitance ESD Protection for
High Speed Video Interface
The MG2040 ESD protection diode is designed specifically to
protect HDMI and Display Port with full functionality ESD protection
and back drive current protection for V
CC
line. Ultra−low capacitance
and low ESD clamping voltage make this device an ideal solution for
protecting voltage sensitive high speed data lines. The flow−through
style package allows for easy PCB layout and matched trace lengths
necessary to maintain consistent impedance for the high speed TMDS
lines.
Features
• Full Function HDMI / Display Port Solution
• Single Connect, Flow through Routing for TMDS Lines
• Low Capacitance (0.35 pF Typical, I/O to GND)
• Protection for the Following IEC Standards:
IEC 61000−4−2 Level 4 (±8 kV Contact)
• UL Flammability Rating of 94 V−0
• SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
• This is a Pb−Free Device
Typical Applications
• HDMI
• Display Port
MAXIMUM RATINGS (T
J
= 25°C unless otherwise noted)
Rating
Symbol Value Unit
Operating Junction Temperature Range T
J
−55 to +125 °C
Storage Temperature Range T
stg
−55 to +150 °C
Lead Solder Temperature −
Maximum (10 Seconds)
T
L
260 °C
IEC 61000−4−2 Contact (ESD)
IEC 61000−4−2 Air (ESD)
ESD
ESD
±15
±15
kV
kV
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
See Application Note AND8308/D for further description of
survivability specs.
MARKING
DIAGRAM
Device Package Shipping
ORDERING INFORMATION
UDFN18
CASE 517CP
http://onsemi.com
MG2040MUTAG UDFN18
(Pb−Free)
3000 / Tape &
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
(Note: Microdot may be in either location)
2040MG
G
2040 = Specific Device Code
M = Date Code
G = Pb−Free Package
1
18
SZMG2040MUTAG UDFN18
(Pb−Free)
3000 / Tape &
Reel
MG2040, SZMG2040
http://onsemi.com
2
1
2
3
4
5
6
7
8
9
10
11
18
17
16
15
14
13
12
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
GND
GND
GND
GND
GND
GND
GND
Pin 1 Pin 2 Pin 3
Pin 4 Pin 5 Pin 6
Pin 7 Pin 8 Pin 9
Pin 10 Pin 11 Pin 13 Pin 15 Pin 17
Center Pins, Pin 12, 14, 16, 18
Note: Common GND – Only Minimum of 1 GND connection required
Figure 1. Pin Schematic
Figure 2. Pin Configuration
=
Note: Pins 12, 14, 16, 18 and center pins are connected internally as a common ground.
Only minimum of one pin needs to be connected to ground for functionality of all pins.
MG2040, SZMG2040
http://onsemi.com
3
ELECTRICAL CHARACTERISTICS (T
A
= 25°C unless otherwise specified)
Parameter
Symbol Conditions Min Typ Max Unit
Reverse Working Voltage V
RWM
I/O Pin to GND (Note 1) 5.0 V
Breakdown Voltage V
BR
I
T
= 1 mA, I/O Pin to GND 5.5 V
Reverse Leakage Current I
R
V
RWM
= 5 V, I/O Pin to GND 1.0
mA
Clamping Voltage (Note 1) V
C
I
PP
= 1 A, I/O Pin to GND (8 x 20 ms pulse)
10 V
Clamping Voltage (Note 2) V
C
IEC61000−4−2, ±8 kV Contact See Figures 3 and 4 V
Clamping Voltage
TLP (Note 3)
See Figures 8 through 11
V
C
I
PP
= 8 A
I
PP
= 16 A
I
PP
= −8 A
I
PP
= −16 A
11.4
15.3
−4.6
−8.1
Junction Capacitance C
J
V
R
= 0 V, f = 1 MHz between I/O Pins 0.15 0.20
pF
V
R
= 0 V, f = 1 MHz between I/O Pins and GND 0.35 0.42
Junction Capacitance
Difference
DC
J
V
R
= 0 V, f = 1 MHz between I/O Pins 0.02
pF
V
R
= 0 V, f = 1 MHz between I/O Pins and GND 0.04
1. Surge current waveform per Figure 7.
2. For test procedure see Figures 5 and 6 and application note AND8307/D.
3. ANSI/ESD STM5.5.1 − Electrostatic Discharge Sensitivity Testing using Transmission Line Pulse (TLP) Model.
TLP conditions: Z
0
= 50 W, t
p
= 100 ns, t
r
= 4 ns, averaging window; t
1
= 30 ns to t
2
= 60 ns.
Figure 3. IEC61000−4−2 +8 KV Contact
Clamping Voltage
Figure 4. IEC61000−4−2 −8 KV Contact
Clamping Voltage
TIME (ns) TIME (ns)
VOLTAGE (V)
VOLTAGE (V)
−10
0
10
20
30
40
50
60
70
80
90
−20 0 20 40 60 80 100 120 140
−50
−40
−30
−20
−10
0
−20 0 20 40 60 80 100 120 140
P1-P3P4-P6P7-P8

MG2040MUTAG

Mfr. #:
Buy MG2040MUTAG
Manufacturer:
ON Semiconductor
Description:
TVS Diodes / ESD Suppressors HDMI PORT ESD 350V TR
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet