ADM698/ADM699–SPECIFICATIONS
Parameter Min Typ Max Units Test Conditions/Comments
V
CC
Operating Voltage Range 3.0 5.5 V
Supply Current 0.6 1.95 mA
Power-Down Reset Assertion 4.5 4.65 4.73 V
Power-Up Reset Deassertion 4.73 V
Reset Threshold Hysteresis 40 mV
Reset Active Time 140 200 280 ms T
A
= +25°C, V
CC
= +5 V
Watchdog Timeout Period (ADM699) 1.0 1.6 2.25 s T
A
= +25°C, V
CC
= +5 V
Minimum WDI Input Pulse Width 50 ns V
IL
= 0.4, V
IH
= 3.5 V
RESET Output Voltage 0.4 V I
SINK
= 1.6 mA, Vcc = 4.4 V
RESET Output Voltage (V
CC
= 1 V) 4 200 mV I
SINK
= 10 µA, V
CC
= 1.0 V
3.5 V I
SOURCE
= 1 µA, V
CC
= 5 V
RESET and
WDO Output Voltage 0.4 V I
SINK
= 1.6 mA, V
CC
= 5 V
3.5 V I
SOURCE
= 1 µA, V
CC
= 4.4 V
RESET Output Short Circuit Current 25 mA Output Sink Current
WDI Input Threshold (ADM699)
Logic Low 0.8 V
Logic High 3.5 V
WDI Input Current 20 50 µA WDI = V
CC
, T
A
= +25°C
–50 –20 µA WDI = 0 V, T
A
= +25°C
Specifications subject to change without notice.
REV. 0
–2–
(V
CC
= +5 V 6 10%, T
A
= T
MIN
to T
MAX
unless otherwise noted)
ORDERING GUIDE
Temperature Package
Model Range Option
ADM698AN –40°C to +85°C N-8
ADM698AR –40°C to +85°C R-16
ADM698AQ –40°C to +85°C Q-8
ADM698SQ –55°C to +125°C Q-8
ADM699AN –40°C to +85°C N-8
ADM699AR –40°C to +85°C R-16
ADM699AQ –40°C to +85°C Q-8
ADM699SQ –55°C to +125°C Q-8
WARNING!
ESD SENSITIVE DEVICE
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the ADM698/ADM699 features proprietary ESD protection circuitry, permanent
damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper
ESD precautions are recommended to avoid performance degradation or loss of functionality.
ABSOLUTE MAXIMUM RATINGS*
(T
A
= +25°C unless otherwise noted)
V
CC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +6 V
All Other Inputs . . . . . . . . . . . . . . . . . . . –0.3 V to V
CC
+ 0.3 V
Power Dissipation 8-Pin DIP . . . . . . . . . . . . . . . . . . . . 500 mW
θ
JA
, Thermal Impedance . . . . . . . . . . . . . . . . . . . . +120°C/W
Power Dissipation 16-Pin SOIC . . . . . . . . . . . . . . . . . 375 mW
θ
JA
, Thermal Impedance . . . . . . . . . . . . . . . . . . . . +110°C/W
Power Dissipation 8-Pin Cerdip . . . . . . . . . . . . . . . . . . 500 mW
θ
JA
, Thermal Impedance . . . . . . . . . . . . . . . . . . . . +125°C/W
Operating Temperature Range
Industrial (A Version) . . . . . . . . . . . . . . . . . –40°C to +85°C
Extended (S Version) . . . . . . . . . . . . . . . . . –55°C to +125°C
Storage Temperature Range . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature (Soldering, 10 secs) . . . . . . . . . . . . +300°C
Vapor Phase (60 secs) . . . . . . . . . . . . . . . . . . . . . . . +215°C
Infrared (15 secs) . . . . . . . . . . . . . . . . . . . . . . . . . . . +220°C
*Stresses above those listed under “Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only and functional operation of
the device at these or any other conditions above those listed in the operational
sections of this specification is not implied. Exposure to absolute maximum ratings
for extended periods of time may affect device reliability.