https://www.phoenixcontact.com/us/products/2900389
10/23/2014Page2/5
Solid-state relay module-PLC-OPT-230AC/300DC/1-2900389
Technical data
Dimensions
Depth 86 mm
Ambient conditions
Ambient temperature (operation) -25 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Input data
Nominal input voltage U
N
230 V AC
Input voltage range in reference to U
N
0.8 ... 1.1
Switching threshold "0" signal in reference to U
N
≤ 0.4
Switching threshold "1" signal in reference to U
N
≥ 0.8
Typical input current at U
N
8.4 mA
Typical response time 19 ms
Typical turn-off time 6 ms
Operating voltage display Yellow LED
Type of protection Bridge rectifier
Protective circuit/component Bridge rectifier
Transmission frequency 10 Hz
Output data
Designation Output data
Output voltage range
12 V DC ... 300 V DC (Partition plate PLC-ATP must be installed for
voltages larger than 250 V (L1, L2, L3) between identical terminal points in
adjacent modules. Potential bridging is then carried out with FBST 8-PLC...
or ...FBST 500...)
Limiting continuous current 1 A (see derating curve)
Voltage drop at max. limiting continuous current < 500 mV
Type of protection Protection against polarity reversal
Surge protection
Protective circuit/component Polarity protection diode
Varistor
Connection data
Connection method Push-in connection
Stripping length 8 mm
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section stranded min. 0.14 mm²
Conductor cross section stranded max. 2.5 mm²
Conductor cross section AWG/kcmil min. 26
