IMC-0402
www.vishay.com
Vishay Dale
Product is End of Life December 2015
Revision: 29-Jun-15
1
Document Number: 34038
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
High Frequency, Surface Mount, Laser Spiral, Coated Inductors
Note
(1)
Value obtained when current flows and temperature has risen 15 °C
FEATURES
• Very small size
• High self-resonant frequency values
• High Q values relative to size at higher
frequencies
• Coated coil provides protection and moisture
resistance
• Compatible with vapor phase and infrared reflow
soldering
• Tape and reel packaging for automatic handling,
10 000/reel, EIA-481
• L and Q value not affected by mounting orientation
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
ELECTRICAL SPECIFICATIONS
Inductance Range: 1.0 nH to 100 nH
Inductance and Tolerance: ± 0.3 nH for 1.0 nH to 5.6 nH,
± 5 % for 6.8 nH to 100 nH
Operating Temperature: -40 °C to +100 °C
Core Material: Ceramic
TEST EQUIPMENT
• Inductance and Q measured on HP4291B
• SRF measured on HP8753E
• DCR measured on HP4338B
STANDARD ELECTRICAL SPECIFICATIONS
IND.
(nH) TOL.
TEST
FREQ.
(MHz)
Q
MIN.
SRF
MIN.
(MHz)
DCR
MAX.
()
RATED
DC
CURRENT
(mA)
(1)
L Q
1.0 0.3 nH, 0.2 nH 100 800 21 6000 0.05 400
1.2 0.3 nH, 0.2 nH 100 800 21 6000 0.06 400
1.5 0.3 nH, 0.2 nH 100 800 21 6000 0.07 400
1.8 0.3 nH, 0.2 nH 100 800 21 6000 0.08 400
2.2 0.3 nH, 0.2 nH 100 800 21 6000 0.09 400
2.7 0.3 nH, 0.2 nH 100 800 21 5500 0.10 400
3.3 0.3 nH, 0.2 nH 100 800 21 5500 0.12 400
3.9 0.3 nH, 0.2 nH 100 800 20 5200 0.15 360
4.7 0.3 nH, 0.2 nH 100 800 20 4800 0.17 360
5.6 0.3 nH, 0.2 nH 100 800 20 4600 0.19 340
6.8 5 % 100 800 19 4000 0.30 320
8.2 5 % 100 800 19 3500 0.35 320
10 5 %, 2 % 100 800 19 2800 0.41 320
12 5 %, 2 % 100 800 19 2800 0.45 320
15 5 %, 2 % 100 800 19 2500 0.60 240
18 5 %, 2 % 100 800 19 2200 0.70 240
22 5 %, 2 % 100 800 19 2000 0.80 200
27 5 %, 2 % 100 800 19 1800 1.20 200
33 5 %, 2 % 100 800 18 1800 1.40 170
39 5 %, 2 % 100 800 18 1800 1.70 150
47 5 %, 2 % 100 800 17 1800 2.10 140
56 5 %, 2 % 100 800 17 1500 2.50 130
68 5 %, 2 % 100 800 15 1500 4.00 120
82 5 %, 2 % 100 800 15 1400 4.50 110
100 5 %, 2 % 100 800 14 1200 5.50 90
DIMENSIONS in inches [millimeters]
0.008 [0.2]
0.020 ± 0.004
[0.5 ± 0.1]
0.063 [1.60]
Solder Pad Layout
0.02 [0.50]
0.020 [0.50]
0.039 ± 0.004
[1.0 ± 0.1]
0.020 ± 0.004
[0.5 ± 0.1]
DESCRIPTION
IMC-0402 10 nH ± 5 % ER e3
MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC
®
LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
IMC 0402 ER 10N J
PRODUCT
FAMILY
SIZE PACKAGE
CODE
INDUCTANCE
VALUE
TOL.
