1
Connectors (Inlets/Outlets)
6015
https://www.schurter.com /PG07
Connectors
IEC Appliance Inlet C18, Snap-in Mounting, Solder, Quick-connect, Screw- or PCB Terminal
Snap-in version
See below:
Approvals and Compliances
C18
70° C
Description
- Panel Mount :
Snap-in version , Front Side
- 1 Function
- Appliance Inlet , Pin temperature 70 °C , Protection class II
- Solder, quick-connect, screw, PCB
References
Alternative: protection class I version
Weblinks
pdf datasheet, html-datasheet, General Product Information, Distributor-
Stock-Check, Accessories, Detailed request for product, Microsite
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC 10 A / 250 VAC; 50 Hz
Ratings UL/CSA 15 A / 250 VAC; 60 Hz
Dielectric Strength > 3 kVAC between L-N
> 1.5 kVAC between L/N-PE
(1 min/50 Hz)
Allowable Operation Tempe-
rature
-25 °C to 70 °C
IP-Protection from front side IP 20 acc. to IEC 60529
Insulation cover Suitable for appliances with protection
class II acc. to IEC 61140
Terminal Solder, quick-connect, screw, PCB
Panel Thickness S Snap-in version
0.8/1.0/1.2/1.5/2.0/2.5/3.0/4.0 mm
Material: Housing PA6, black or grey, UL 94V-0
appliance inlet/-outlet C18 acc. to IEC 60320-1
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 10 A, Protection Class II
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: 6015
Approval Logo Certificates Certification Body Description
VDE Approvals VDE Certificate Number: 40011871
CSA Approvals CSA CSA Certification Record: 27324
CQC Approvals CQC CCC Certificate Number: