RT25
www.vishay.com
Vishay Sfernice
Revision: 24-Aug-16
2
Document Number: 50026
For technical questions, contact: sferfixedresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LOCKING DEVICE
This is supplied as an option.
The available spindle length is according to the panel
thickness.
Order reference: DBA6
ADAPTATION BOARD
This enables 2 point mounting instead of bush mounting.
The adaptation board is supplied as an option with 2
mounting screws. Consequently, the available spindle
length is reduced by 9.5 mm.
Note
• For any special requirement on request: spindle flats, etc. Please
supply detailed drawing.
MARKING
Vishay Sfernice trademark, series, style, power rating in watts, ohmic value (in or k), tolerance (in %), maximum current in
A, manufacturing date.
SPINDLES
Ø
mm
DISTANCE TO
MOUNTING
PLATE mm
SCREW
DRIVER
SLOT
CODE
6
22 With ASF
25
Without AM
With AMF
50 Without AL
6 22 Without AS
1 ± 0.2
13
2 tightening screws
spanner n° 14
max. panel thickness
6.5
PARTICULAR CHARACTERISTICS
NOMINAL
RESISTANCE
MAX. SERVICE
VOLTAGE
V
MAX. CURRENT
THROUGH WIPER
mA
1 5 5000
1.5 6.12 4080
2.2 7.42 3370
3.3 9.08 2750
4.7 10.8 2300
6.8 13 1920
10 15.8 1580
15 19.4 1290
22 23.5 1070
33 28.7 870
47 34.3 730
68 41.2 605
100 50 500
150 61.2 408
220 74.2 337
330 90.8 275
470 108 230
680 130 192
1K 158 158
1.5K 194 129
2.2K 235 107
3.3K 287 87
4.7K 343 73
56
47
4 holes Ø 3.5
Ø 12
5
6
7
8
9
10
0
1
2
3
4
56
47
DIAL CG57 (OPTION)
18
Ø 7
Ø 43
21
COMMAND SHAFT 29JF (OPTION)
