HB LED driver with diagnostics based on the LED2472G and
STM32
Features
• Two LED2472G devices (TQFP48 package)
connected to 3 x 16 RGB high-brightness
LEDs
• STM32 microcontroller
• Cost-effective internal high-side oscillator
• JTAG interface for microcontroller firmware
changes/updates
• Mini USB connector for interconnection with
a PC GUI
• Test points on the board for each important
signal aid laboratory evaluation
• Buttons and knob to control the board
• Error and overtemperature flag for each LED
driver
• 3 jumpers to simulate the disconnection of 3
LEDs
• 3 jumpers to simulate the shorting of 3 LEDs
• Highly efficient ST1S010 DC-DC switching
power supply
• Input: 7.5 V to 18 V, 0.7 A
• RoHS compliant
Description
The STEVAL-ILL015V2 product evaluation board
provides a platform to test and evaluate the
power logic LED driver LED2472G from
STMicroelectronics.
The LED2472G is a 24-bit constant-current LED
sink driver with output error detection, suitable for
applications such as large-area displays and full-
color board panels where improvement in RGB
LED resolution and reduction of system cost are
important.
April 2014 DocID025854 Rev 1 1/5
For further information contact your local STMicroelectronics sales
office
www.st.com