231.800.522.5546 www.VCCLITE.comvccsales@vcclite.com
CABLES
SPECIFICATIONS
MATERIAL
Body - Thermoplastic (black) U.L. 94 V2
Pins - Phosphor bronze .025˝ square tin plate
Spacing - Pins on .100˝ centers
Header - Mates with VCC locking header connector, or equivalent
SPECIFICATIONS
MATERIAL
Header connector - Thermoplastic (black) U.L. 94 V0
Terminals - Phosphor bronze, tin plated
Rate 3 amp continuous service
Wire - 24 AWG, 7 strand copper, PVC insulated
MOUNTING
Non-locking plain header connector mates with any standard .025˝
square header on .100˝ centers. Locking header connectors mate with
VCC positive locking header 450 series. Also mates with standard and
friction header .025˝ pins on .100˝ centers.
OUTLINE DRAWINGS HEADER LOCKING FEATURE PCB HOLE LAYOUT
HEADER CONNECTORS
NON-LOCKING HEADER CONNECTOR LOCKING HEADER CONNECTOR
POSITIVE LOCKING POLARITY HEADER
ONLY AVAILABLE WITH WIRES
CALL FOR ORDER INFORMATION
Header connector mates with VCC locking header CNX xxx, Molex 6373, 7478 friction header or equal.•
Header connectors 2, 3, 4, 6 and 8 position are end-to-end stackable.•
Header connectors with or without locking tab, rated U.L. 94 V0.•
Terminal’s unique tri-finger design mates with pins from .017˝ round to .025˝ square.•
Terminals for use specifically with VCC header connectors.•
Terminals designed for use with wire rating 24 AWG 300V, 105˚C.•
FEATURES
Locking lever provides polarity integrity by restricting insertion of locking header in reverse.•
Lever clicks and locks preventing header connector from being retracted inadvertently.•
Locking header available in 2 to 28 pin positions, vertical or horizontal configuration.•
Designed for both vertical and horizontal mounting on the printed circuit board.•
Pins are .025˝ square brass, tin plated, located on .100˝ centers.•
Locking header mates with VCC locking header connectors or equivalent.•
FEATURES
U.S. & Foreign Patents Issued and Pending
U.S. & Foreign Patents Issued and Pending
HEADER CONNECTOR
PIN CONFIGURATION - 02 TO 28 CIRCUITS
V = VERTICAL / # CIRCUITS
H = HORIZONTAL / # CIRCUITS
ORDERING CODES
CNX V06 NTP
MODEL PLATING
