SPEC NO: DSAN8392 REV NO: V.2B DATE: APR/28/2015 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203014454
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. 1 / 10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
iewing
Angle [1]
Min. Typ. 2θ1/2
APT1608LZGCK Green (InGaN) Water Clear 20 50
120
°
Iv (mcd) [2]
@ 2mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Green 515 nm I
F=2mA
λD [1] Dominant Wavelength Green 525 nm I
F=2mA
Δλ1/2 Spectral Line Half-width Green 35 nm I
F=2mA
C Capacitance Green 45 pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Green 2.65 3 V IF=2mA
I
R Reverse Current Green 50 uA VR=5V
Min.
2.2
Parameter Green Units
Power dissipation 75 mW
DC Forward Current 25 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Notes:
1. θ1 / 2 is the angle from optical centerline where the luminous intensity is 1 / 2 of the optical peak value.
2. Luminous intensity / luminous Flux: + / -15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. Wavelength: + / -1nm.
2. Forward Voltage: + / -0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
