DO NOT
SCALE FROM
THIS PRINT
.1350
REF
3.43
.052 1.32
REF
.027
REF
0.69
.190
±.003
4.83
±0.08
.225
REF
5.72
.025
REF
0.64
= .400[10.16] REF
4 EQ SPCS @ .100[2.54]
.1000
REF
2.54
"A"
"A"
T-1G6-01-X
MIS-19-01-D-XX
C
.065 1.65
REF
.245 6.22
REF
.2650 6.73
"A"
REF
.5000 12.700
(TYP)
.440 11.18
REF
.006 0.15
REF
(TYP)
18 EQ SPCS
@ .0250[0.635]
=.450[11.43]
.010
REF
0.25
C
02
01
MIS-XXX-XX-X-D-XX
No OF POSITIONS
-019, -038, -057, *-076,
*-095, *-114, *-133
(PER ROW)
ROW SPECIFICATION
-D: DOUBLE (USE MIS-19-01-D-XX)
PLATING SPECIFICATION
LEAD STYLE
-01: .1430[3.632]
OPTION
-K: POLYIMIDE FILM PAD
(USE K-DOT-.325-.450-.005,
SEE FIG 2, SHT 2)
-TR: TAPE & REEL (-076 POS MAX)
No OF BANKS
-F: 3µ" FLASH GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
(USE C-149-01-F AND T-1G6-01-F)
-L: 10µ" LIGHT GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
(USE C-149-01-L AND T-1G6-01-L)
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL.
(USE C-149-01-H AND T-1G6-01-H)
-C: 50µ" ELECTRO-POLISHED GOLD IN
CONTACT AREA, MATTE TIN ON TAIL.
(USE C-149-01-C AND T-1G6-01-L)
(* = SEE NOTE 11)
.025
REF
0.64
.007
REF
0.18
.1430
-
.0010
+
.0030
3.632
-
0.025
+
0.076
(SEE NOTE 8)
.295 7.493
.047
REF
1.194
.017±.005
0.43±0.127
(SEE NOTE 13)
.165
-
.001
+
.005
4.19
-
0.03
+
0.13
.030
REF
0.76
(MATING AREA)
SEE TABLE 1
SECTION "A"-"A"
C
C
C-149-01-X
C
C
FIG 1
(MIS-057-01-X-D SHOWN)
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3]
2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
.635mm DOUBLE ROW HS SOCKET ASSEMBLY
BY:
MIS-XXX-XX-X-D-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
7/7/1999
2
1
SHEET SCALE: 2:1
INSULATOR: LCP, UL 94 V-0; COLOR: BLACK
CONTACT & GROUND PLANE: PHOS BRONZE
F:\DWG\MISC\MKTG\MIS-XXX-XX-X-D-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. NOTE DELETED.
3. MAXIMUM BURR ALLOWANCE: .0015[.038] MAX.
4. MINIMUM TERMINAL RETENTION: 8 OZ.
5. MINIMUM GROUND PLANE RETENTION: 8 OZ.
6. MAXIMUM ALLOWABLE BOW: .002[.05] INCH/INCH AFTER ASSEMBLY.
7. PARTS TO BE MOLDED TO POSITION.
8. MAX VARIANCE: .002[.05].
9. NOTE DELETED.
10. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
11. FOR APPLICATIONS REQUIRING THESE POSITIONS, PLEASE CONTACT SAMTEC
INTERCONNECT PROCESSING GROUP.
12. TO BE PACKAGED IN TRAYS.
13. CHECK ONCE PER BANK ALTERNATING SIDES FOR MULTIPLE BANK PARTS.
REVISION AB
