THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
*
*
DO NOT
SCALE FROM
THIS PRINT
SDX-1XX-XX-XX-X-X
No OF POSITIONS
-01 THRU -36
(PER ROW)
LEAD STYLE
(SEE SOCKET SPECIFICATION, TABLES 1 & 2)
PLATING SPECIFICATION
-G: 10µ" GOLD ON CONTACT,
10µ" GOLD ON SHELL
(SPECIFIY 'GG' IN SOCKET SUFFIX 'XX')
-T: 30µ" GOLD ON CONTACT,
MATTE TIN ON SHELL
(-GT OPTION NOT AVAILABLE ON LEAD STYLE -7)
(SPECIFY 'GT' IN SOCKET SUFFIX 'XX')
-TT: MATTE TIN ON CONTACT,
MATTE TIN ON SHELL
(NOT AVAILABLE ON LEAD STYLES -7 AND -21A THRU -39)
(SPECIFY 'TT' IN SOCKET SUFFIX 'XX')
-S: 10µ" SELECTIVE GOLD ON CONTACT,
MATTE TIN ON SHELL
(ONLY AVAILABLE ON LEAD STYLES -2 & -22)
(NOT AVAILABLE ON SDL-)
( FOR LOCKING LEAD OPTION, USE SC-1L1-GT)
(SPECIFY 'ST' IN SOCKET SUFFIX 'XX')
OPTION
-N: NON-FLUSH
(SEE NOTE 6)
(NOT AVAILABLE ON LEAD STYLES
-5A, -7, -21A, -21C, & -29)
BODY SPECIFICATION
SDL: SLIM (USE HSDL-XX)
(SEE NOTE 5)
(ONLY AVAILABLE FOR LEAD STYLES -10,
-11, -12, -19, -30, -31, -32, & -39
(LEAVE BLANK FOR SD, USE DSB-36)
(NOT AVAILABLE FOR LEAD STYLES -10,
-11, -12, -19, -30, -31, -32, & -39)
OPTION
-L: LOCKING LEAD
(ONLY AVAILABLE WITH LEAD STYLES -2 & -22)
(ONLY AVAILABLE WITH -T PLATING)
"A"
(SEE TABLE 1)
.003 0.08
MAX
FIG 2
SD-1XX-XX-2-N SHOWN
(SEE NOTE 6)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
C
C
(No OF POS x .100[2.54])±.015[0.38]
.200 5.08
REF
'A'
C
01
02
DETAIL 'A'
SCALE 6 : 1
(SEE TABLE 1 & NOTE 7)
.005 0.13
MAX
"B" REF
(SEE TABLE 1)
.100 2.54
REF
SOCKET
(SEE TABLE 1)
FIG 1
SD-1XX-XX-2 SHOWN
DSB-36
C
C
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [0.3] 2
.XXX:
.005 [0.13]
.XXXX:
.0020 [0.051]
MATERIAL:
SOCKET STRIP ASSEMBLY
BY:
SDX-1XX-XX-XX-X-X
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
J. BROWNING
07/27/2015
2
1
SHEET SCALE: 3:1
INSULATOR: LCP or NYLON
COLOR: BLACK
SOCKET: BeCu/BRASS
BRASS
F:\DWG\MISC\MKTG\SDX-1XX-XX-XX-X-X-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM CUT FLASH: .005[0.13] IN ALL AREAS EXCEPT BAR BREAK OFF AREA;
.012[0.31] IN BAR BREAK OFF AREA
3. MINIMUM PUSHOUT FORCE: 5 LB
4. MAXIMUM ALLOWABLE BOW:
SD: 2-10 POS: .006", 11-19 POS: .008" IN/IN,
20-36 POS: .018" IN/IN;
SDL: 2-10 POS: .006",11-19 POS: .015" IN/IN,
20-36 POS: .030" IN/IN.
5. FOR A ONE POSITION SDL, CUT SL-132 TO 2 POSITIONS.
6. FOR -SD WITH -N OPTION, INSERT PIN ON SIDE WITH SMALLER HOLE,
OPPOSITE COUNTERBORE.
7. OPERATOR MUST VERIFY CORRECT PIN BY CHECKING THE NUMBER OF CLIPS.
8. PLATING OPTION -GT NOT AVAILABLE.
9. PLATING OPTION -GG NOT AVAILABLE.
10. POSTIONS 1 - 4 AND ANY BODY/LEAD STYLES NOT LISTED IN THE TUBE TABLE
TO BE PACKAGED IN BULK.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION F
