Kinetis KV5x product family feature summary
Table 1. Family feature summary
Feature Details
Cyclic redundancy check (CRC) 16- or 32-bit CRC with programmable generator polynomial
External bus interface Flexbus ( 32- / 24- / 16- / 8-bit muxed support)
Analog modules
Analog-to-digital converters
Four 12-bit analog-to-digital converters (ADC) with a
sample rate of 5 MSPS
One 16-bit SAR ADC
High-speed comparator (HSCMP) with internal 6-bit digital-to-
analog converter (DAC)
Four modules
12-bit DAC 12-bit DAC with 16-byte FIFO
Nano-edge module One nano-edge module providing 312-picosecond pulse
width and frequency resolution
Timers
FlexPWM
Two eFlexPWM modules, each consisting of four
submodules, with each submodule providing three PWM
outputs
FlexPWMA has nano-edge support
FlexPWMB has dithering support
FlexTimer (FTM) Two 8-channel FlexTimers backward compatible to KV4x
Two 2-channel FlexTimer with quadrature decoding
Quadrature encode / decode unit One module
Programmable delay block (PDB) Two modules
LPTimer CPU wakeup from low-power mode
PIT One 4-channel PIT
Communication Interfaces
Ethernet 10 / 100 MB/s Ethernet MAC (MII and RMII) with hardware
support for IEEE 1588
Serial peripheral interface (DSPI) Three modules with 4-word-deep FIFO
Inter-integrated circuit (I2C) Two modules with SMBUS support
Flexible serial communications interface (FlexSCI) Six modules
All SCIs have IrDA support
SCI0 and SCI1 have 8-word-deep FIFO
FlexCAN Three modules
Kinetis KV5x – Real-Time Control MCUs with Ethernet Product Brief Rev. 0 02/2015
4 Freescale Semiconductor, Inc.