BFC238065272

MKP380
www.vishay.com
Vishay BCcomponents
Not Recommended for New Designs, Use MKP385
Revision: 08-Sep-16
7
Document Number: 28136
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1)
See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
Notes
(1)
H = in-tape height; P
0
= sprocket hole distance; for detailed specifications refer to packaging information
(2)
Weight for short lead product only
SPQ = Standard Packing Quantity
SPECIFIC REFERENCE DATA - 630 V
DC
DESCRIPTION VALUE
Tangent of loss angle: at 10kHz at100kHz
0.0015μF C 0.0091μF 10 x 10
-4
15 x 10
-4
0.0091 μF < C 0.01 μF 10 x 10
-4
15 x 10
-4
Rated voltage pulse slope (dU/dt)
R
at 630V (DC) 120V/μs
R between leads for C 1.0 μF at 500V; 1min > 100 000M
R between interconnected leads and case; 500V; 1min > 100 000M
Withstanding (DC) voltage (cut off current 10mA)
(1)
; rise time 1000V/s 880V; 1min
Withstanding (DC) voltage between leads and case 2840V; 1min
ELECTRICAL DATA AND ORDERING CODE
U
RDC
(V)
CAP.
(μF)
DIMENSIONS
w x h x l
(mm)
MASS
(2)
(g)
CATALOG NUMBER BFC2 380 ..... AND PACKAGING
AMMOPACK
(1)
LOOSE IN BOX
H= 18.5 mm, P
0
= 12.7 mm
l
t
= 4.0 mm
+ 1.0 mm / - 0.5 mm
C-TOL. = ± 10 %
SPQ SPQ
LAST 5 DIGITS OF
CATALOG NUMBER
630
PITCH = 5.0 ± 0.3mm; d
t
= 0.50 ± 0.05mm; U
RAC
= 200 V; U
p-p
= 560 V
0.0022
3.5 x 8.0 x 7.2 0.30
65222
1500
2000
0.0024 65242
0.0027 65272
0.0030 65302
0.0033 65332
0.0036 65362
0.0039 65392
0.0043 65432
1000
0.0047 65472
0.0051 65512
0.0056 65562
0.0062 65622
750
0.0068 65682
0.0075
4.5 x 9.0 x7.2 0.42
65752
0.0082 65822
0.0091 65912
0.010 65103
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

BFC238065272

Mfr. #:
Manufacturer:
Vishay
Description:
Film Capacitors .0027uF 10% 630volts
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union