240Pin DDR3 1600 1.35V ECC UDIMM
4GB Based on 512Mx8
AQD-D3L4GE16-SG
Description
AQD-D3L4GE16-SG is a DDR3 ECC Unbuffered DIMM,
high-speed, low power memory module that use 9 pcs of
512Mx8bits DDR3 low voltage SDRAM in FBGA package
and a 2048 bits serial EEPROM on a 240-pin printed
circuit board. AQD-D3L4GE16-SG is a Dual In-Line
Memory Module and is intended for mounting into 240-pin
edge connector sockets.
Synchronous design allows precise cycle control with the
use of system clock. Data I/O transactions are possible
on both edges of DQS. Range of operation frequencies,
programmable latencies allow the same device to be
useful for a variety of high bandwidth, high performance
memory system applications.
Features
RoHS compliant products.
JEDEC standard 1.35V(1.28V~1.45V) Power supply
VDDQ=1.35V(1.28V~1.45V) & 1.5V(1.425V~1.575V)
Clock Freq: 800MHZ for 1600Mb/s/Pin.
Programmable CAS Latency: 6, 7, 8, 9, 10, 11
Programmable Additive Latency (Posted /CAS):
0,CL-2 or CL-1 clock
Programmable /CAS Write Latency (CWL)
= 8(DDR3-1600)
8 bit pre-fetch
Burst Length: 4, 8
Bi-directional Differential Data-Strobe
Internal calibration through ZQ pin
On Die Termination with ODT pin
Serial presence detect with EEPROM
On DIMM Thermal Sensor
Asynchronous reset
Pin Identification
Pin Identification
On-die termination control
