Document Number: 31511 For technical questions, contact: ff2aresistors@vishay.com
www.vishay.com
Revision: 07-Jun-10 3
MDP 01, 03, 05
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
Vishay Dale
Note
• Standard E24 resistance values stocked. Consult factory.
CIRCUIT APPLICATIONS
01 SCHEMATIC
13 and 15 resistors with one pin common
The MDPXX01 circuit provides a choice of 13 and 15 nominally equal
resistors, each connected between a common pin (14 and 16) and a
discrete PC board pin. Commonly used in the following applications:
• MOS/ROM Pull-up/Pull-down • TTL Input Pull-down
• Open Collector Pull-up • Digital Pulse Squaring
• "Wired OR" Pull-up • TTL Unused Gate Pull-up
• Power Driven Pull-up • High Speed Parallel Pull-up
03 SCHEMATIC
7 and 8 isolated resistors
The MDPXX03 provides a choice of 7 and 8 nominally equal resistors,
each resistor isolated from all others and wired directly across.
Commonly used in the following applications:
• "Wired OR" Pull-up • Long-line Impedance Balancing
• Power Driven Pull-up • LED Current Limiting
• Powergate Pull-up • ECL Output Pull-down
• Line Termination • TTL Input Pull-down
05 SCHEMATIC
TTL dual-line terminator; pulse squaring
The MDPXX05 circuit contains 12 and 14 series pair of resistors.
Each series pair is connected between ground and a common line.
The junction of these resistor pairs is connected to the input terminals.
The 05 circuits are designed for TTL dual-line termination and pulse
squaring.
•••••
•
••
Pin #1
MDP1401
MDP1601
MDP1603
MDP1403
Pin #1
MDP1405, MDP1605
Pin #1
R1 R1 R1 R1 R1 R1 R1
R2 R2 R2 R2 R2
R2R2
R1 R1 R1 R1 R1 R1 R1
R2R2R2 R2 R2 R2 R2
16 Pin Package
14 Pin Package
Single Resistor
03
01 and 05
3.00
2.70
0.380
0.190
- 50 + 25 + 70 + 125 + 150
Derating
Ambient Temperature C
Power Rating (W)