R/T characteristics
R/T No.
8016 8018
T (°C) B
25/100
= 3988 K B
25/100
= 3964 K
R
T
/R
25
α (%/K) R
T
/R
25
α (%/K)
55.0 96.3 7.4 82.408 7.0
50.0 67.01 7.2 58.344 6.8
45.0 47.17 6.9 41.775 6.6
40.0 33.65 6.7 30.235 6.4
35.0 24.26 6.4 22.109 6.2
30.0 17.7 6.2 16.327 6.0
25.0 13.04 6.0 12.171 5.8
20.0 9.707 5.8 9.1548 5.6
15.0 7.293 5.6 6.9458 5.4
10.0 5.533 5.5 5.3135 5.3
5.0 4.232 5.3 4.0972 5.1
0.0 3.265 5.1 3.1834 5.0
5.0 2.539 5.0 2.4915 4.8
10.0 1.99 4.8 1.9637 4.7
15.0 1.571 4.7 1.5582 4.6
20.0 1.249 4.5 1.2444 4.4
25.0 1.0000 4.4 1.0000 4.3
30.0 0.8057 4.3 0.80843 4.2
35.0 0.6531 4.1 0.65732 4.1
40.0 0.5327 4.0 0.53743 4.0
45.0 0.4369 3.9 0.44175 3.9
50.0 0.3603 3.8 0.36497 3.8
55.0 0.2986 3.7 0.30303 3.7
60.0 0.2488 3.6 0.2528 3.6
65.0 0.2083 3.5 0.21187 3.5
70.0 0.1752 3.4 0.17836 3.4
75.0 0.1481 3.3 0.15079 3.3
80.0 0.1258 3.2 0.128 3.2
85.0 0.1072 3.2 0.1091 3.2
90.0 0.09177 3.1 0.093342 3.1
95.0 0.07885 3.0 0.080158 3.0
100.0 0.068 2.9 0.069084 2.9
105.0 0.05886 2.9 0.059747 2.9
110.0 0.05112 2.8 0.051845 2.8
115.0 0.04454 2.7 0.045134 2.7
120.0 0.03893 2.6 0.039416 2.7
125.0 0.03417 2.6 0.034527 2.6
130.0 0.03009 2.5 0.030333 2.6
135.0 0.02654 2.5 0.026724 2.5
140.0 0.02348 2.4 0.02361 2.5
145.0 0.02083 2.4 0.020914 2.4
150.0 0.01853 2.3 0.018575 2.3
155.0 0.01653 2.3 0.016538 2.3
Temperature measurement B57867S
Miniature sensors with bendable wires S867
Page 7 of 23Please read Cautions and warnings and
Important notes at the end of this document.
Temperature measurement B57867S
Miniature sensors with bendable wires S867
Page 8 of 23Please read Cautions and warnings and
Important notes at the end of this document.
Mounting instructions
1 Soldering
1.1 Leaded NTC thermistors
Leaded thermistors comply with the solderability requirements specified by CECC.
When soldering, care must be taken that the NTC thermistors are not damaged by excessive
heat. The following maximum temperatures, maximum time spans and minimum distances have
to be observed:
Dip soldering Iron soldering
Bath temperature max. 260 °C max. 360 °C
Soldering time max. 4 s max. 2 s
Distance from thermistor min. 6 mm min. 6 mm
Under more severe soldering conditions the resistance may change.
1.1.1 Wave soldering
Temperature characteristic at component terminal with dual wave soldering
1.2 Leadless NTC thermistors
In case of NTC thermistors without leads, soldering is restricted to devices which are provided
with a solderable metallization. The temperature shock caused by the application of hot solder
may produce fine cracks in the ceramic, resulting in changes in resistance.
To prevent leaching of the metallization, solder with silver additives or with a low tin content
Temperature measurement B57867S
Miniature sensors with bendable wires S867
Page 9 of 23Please read Cautions and warnings and
Important notes at the end of this document.

B57867S0202F140

Mfr. #:
Manufacturer:
EPCOS / TDK
Description:
NTC Thermistors 2k 3560 1%
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union