THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
*
*
DO NOT
SCALE FROM
THIS PRINT
No OF POSITIONS
-05 THRU -90
(PER ROW)
ROW SPECIFICATION
-DV: DOUBLE ROW VERTICAL
(USE FTE-90-D-A)
LEAD STYLE
-01: .075 POST
(USE T-1S29-04-X-2 FOR HAND FILL,
T-1S29-02-X-2 FOR MACHINE FILL).
-02: .175 POST
(USE T-1S29-04-X-2 FOR HAND FILL,
T-1S29-02-X-2 FOR MACHINE FILL).
-03: .120 POST
(USE T-1S29-04-X-2 FOR HAND FILL,
T-1S29-02-X-2 FOR MACHINE FILL).
OPTIONS
FTE-1XX-XX-X-DV-XX-XX
PLATING SPEC
-G: 10µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
(STYLE -01 ONLY)
-ES: END SHROUD
[SAMTEC DISCRETION ON WHICH -ES USED]
(SEE FIG 3, SHT 2 FOR SNAPPED-ON,
11 POSITIONS MIN)
(SEE FIG 8, SHT 2 FOR MOLDED,
5 POSITIONS PER ROW MIN, SEE TABLE 2)
-EC: END SHROUD WITH LOCKING CLIPS
(SEE FIG 7, SHT 2)
(11 POSITIONS MIN)
-EP: END SHROUD WITH GUIDE POSTS
(SEE FIG 4, SHT 2)
(11 POSITIONS MIN)
-P: PICK AND PLACE PAD (SEE FIG 2, SHT 2)
(ONLY AVAILABLE FOR 08-90 POSITIONS)
(USE PPP-37)
( USE PPP-37-NT FOR TAPE & REEL)
-TR: TAPE & REEL PACKAGING
(USE PPP-37-NT ONLY)
-A: ALIGNMENT PIN (MOLDED OR STAKED)
[ SAMTEC DISCRETION ON WHICH
-A PIN USED]
(MOLDED 4 POS MIN, SEE FIG 6, SHT 2)
(USE FTE-90-D-XX)
(STAKED 7 POS MIN, SEE FIG 5, SHT 2)
(USE FTE-90-D-A)
-M: METAL PICK & PLACE PAD
USE MPP-17-5 (SEE FIG 9 - SHT 3)
(10 POS MIN, AVAILABLE IN -01 STYLE ONLY)
FLEX SHROUD OPTIONS
.055
REF
1.40
.0120
SQ REF
0.305
(SEE TABLE 1)
"A"
.075 1.91
(CONTACT AREA)
2
MAX SWAY
(EITHER DIRECTION)
T-1S29-XX-X-2
SEE NOTE 9
FTE-90-D
C
SEE NOTE 2 SEE NOTE 2
FIG 1
FTE-1XX-03-X-DV SHOWN
(No OF POS x .0315)
.1200 3.048
REF
.0315 0.800
.0157 0.399
2
MAX SWAY
(EITHER DIRECTION)
"A"
"A"
C
L
01
02
179
180
+.004[+0.10]
-.010[-0.25]
SEE NOTE 11
C
.18 4.6
.070 1.78
90°
±3°
.0472±.016 1.200±0.41
2.5
MAX SWAY
(EITHER DIRECTION)
SECTION "A"-"A"
BURR SIDE
(SEE NOTE 4 & 5)
C
SEE NOTE 6
C
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.X:
.1 [2.5]
.XX:
.01 [0.3] 2
.XXX:
.005 [0.13]
.XXXX:
.0020 [0.051]
MATERIAL:
.8MM x 1.2MM C.L. TERMINAL STRIP ASSM.
BY:
FTE-1XX-XX-X-DV-XX-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
DEAN P
9/01/2009
3
1
SHEET SCALE: 4:1
F:\DWG\MISC\MKTG\FTE-1XX-XX-X-DV-XX-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM CUT FLASH: .010 [0.25]
3. MINIMUM PUSHOUT FORCE: 1 LB
4. SHEAR TAILS TO DIMENSION SHOWN.
5. MAXIMUM BURR: .003 [0.08]
6. MAXIMUM COPLANARITY:
-05 THRU -49 = .004 [0.10]
-50 THRU -64 = .006 [0.15]
-65 THRU -90 = .009 [0.22]
7. FOR -XX POSITION ASSEMBLY USE -XX POSITION
BODY EXCEPT AS LISTED IN TABLE 2.
8. IF -A CALLED OUT ON ASSEMBLY, USE -A ON END OF BODY CALLOUT.
USE FTE-190-0X-G-DV-SA FOR STOCK THAT WILL BE CUT FOR STAKED -A ORDERS.
USE FTE-190-0X-G-DV FOR ORDERS NOT REQUIRING STAKED -A OPTION.
9. MAXIMUM ATTACHED FLASH ALLOWED ON POST SIDE ONLY: .02 [0.5]
10. DURING CUT PROCESS, WALL MUST BE A MINIMUM OF .004" OR COMPLETELY REMOVED.
11. IF RETENTION IS BELOW SPECIFICATION, A SUBSTITUTION OF FTE-90-D FOR FTE-90-D-A
IS ACCEPTABLE.
INSULATOR: BLACK, LCP, UL 94 VO
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
TERMINAL: PHOS BRONZE
REVISION BF
