THM 10WI Series, 10 Watt
http://www.tracopower.com Page 3 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Output Specifications (continued)
Over voltage protection –Single output 3.3 VDC models: 3.7 – 5.4 VDC
5.0 VDC models: 5.6 – 7.0 VDC
12 VDC models: 13.5 – 19.6 VDC
15 VDC models: 18.3 – 22.0 VDC
24 VDC models: 29.1 – 32.5 VDC
–Dual output ±5 VDC models: 5.6 – 7.0 VDC
±12 VDC models: 13.5 – 18.2 VDC
±15 VDC models: 17.0 – 22.0 VDC
Capacitive load –Single output 3.3 VDC models: 3‘000 F max.
5.0 VDC models: 2‘500 F max.
12 VDC models: 430 F max.
15 VDC models: 350 F max.
24 VDC models: 125 F max.
–Dual output ±5 VDC models: 1440 F max. (each output)
±12 VDC models: 550 F max. (each output)
±15 VDC models: 180 F max. (each output)
General Specifications
Temperature ranges – Operating –40°C to +90°C (with derating)
– Rated according to IEC/EN 60601-1 –40°C to +50°C (without derating)
– Case temperature +105°C max.
– Storage temperature –55°C to +125°C
Derating 3.5%/K above 75°C
Thermal impedance 18 °C/W typ.
Humidity (non condensing) 5 % to 95 % rel H max.
Isolation voltage – to meet ES/IEC/EN 60601-1 5000 VACrms, rated for 250 VACrms working
(50Hz, 60sec) voltage, 2 MOPP
Clearance/creepage 8 mm min.
Leakagecurrent ( at 240 VAC, 60 Hz) 2 A max.
Isolation capacitance (input/output) 17 pF max.
Altitude during operation 5000 m
Temperature coefficient ±0.02 %/K typ.
Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) 3‘850‘000 h
Switching frequency 300 kHz ±30 kHz (pulse width modulation)
Vibration and thermal shock resistance according to MIL-STD-810F
Safety standards/approvals – Medical equipment ANSI/AAMI ES60601-1:2005/(R)2012,
IEC/EN60601-1 3rd edition
– Certification documents www.tracopower.com/products/overview/thm10wi
Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material non-conductive black plastic
Base material non-conductive black plastic
Potting material silicone (UL94 V-0 rated)
Package weight 14 g (0.48oz)
Soldering temperature max. 265°C / 10 sec
- The component is not be used in an oxygen rich environment.
- The component is not to be used in conjunction with flammable anaesthetics and agents.
- The component has to be disposed appropriately. Please refer to local regulations (Waste Electrical and Electronic Equipment).
- A modification of the component is not allowed.