Homogeneous conductive rubber construction of the Conductive Floor Mat for
Hard Floors ensures rapid discharge from personnel wearing heel grounders.
The low prole reduces trip hazards and is preferred for use with rolling carts
or chairs. This mat is reversible. Conductive Floor Mat meets the ANSI/ESD
S20.20 ooring required limit tested per ANSI/ESD STM7.1 and ESD TR53,
and is suitable as the ooring component of a Footwear / Flooring personnel
grounding system tested per ANSI/ESD STM97.1.
DRAWING
NUMBER
CONDFM
DATE
November
2016
© 2016 DESCO INDUSTRIES INC.
Employee Owned FGC151M
CONDUCTIVE FLOOR MAT FOR HARD FLOORS
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE: StaticControl.com
PHONE (919) 718-0000
Conductive Floor Mat for Hard Floors
*Color, texture and thickness may vary between lots and mills.
Specifications and procedures subject to change without notice.
Specications Typical Value Test Method
Resistance to Ground point (Rtg)
Resistance Top to Top (Rtt)
≤
10
5
ohms
≤
10
5
ohms
ANSI/ESD STM7.1
ANSI/ESD STM7.1
Thickness* 0.060"
Color* Black
Tolerance Width ± 0.250"
Length ± 0.250"
Made in the
United States of America
Mat Item Numbers
Size Black
48" x 72"
(1.2 m x 1.8 m)
COND4872FM
Mat Includes:
1 Mat, size as specified
2 3034 Snap Fasteners (installed)
Mat Kit Item Numbers
Size Black
36" x 60"
(0.9 m x 1.5 m)
COND3660FM-F
48" x 72"
(1.2 m x 1.8 m)
COND4872FM-F
Mat Kit Includes:
1 Mat, size as specified
1 FGC151M 15' (4.6 m) Ground Cord
2 3034 Snap Fasteners (installed)
Roll Item Numbers
Size Black
2' x 50'
(0.6 m x 15.2 m)
COND24600FM
3' x 50'
(0.9 m x 15.2 m)
COND36600FM
4' x 50'
(1.2 m x 15.2 m)
COND48600FM
Roll Includes:
1 Roll of matting material, size as specified
