TODX2350A(F)
2016-06-14
3. Electrical and Optical Characteristics
(Ta = 25°C, V
CC
= 5 V)
Characteristics Symbol Test Condition Min Typ. Max Unit
Data Rate - NRZ Code(Note 2) DC
-
10 Mb/s
Transmission Distance (Note 2) -
APF(Note 3), I
F
=6mA,
40
-
100 m
APF(Note 3), I
F
=1.5mA,
0.2
-
50 m
Pulse Width Distortion (Note 4) Δtw - -30
-
30 %
Fiber Output Power (Note 5) P
f
I
F
=6mA, Using APF (Note3), - 6
-2 dBm
I
F
=1.5mA, Using APF (Note3), -13
-8 dBm
Center Emission Wavelength λ
C
-
-
650 - nm
Forward Voltage V
F
I
F
=6mA
-
2.0 2.1
V
I
F
=1.5mA
1.8 2.0
V
Reverse Current I
R
V
R
=5V
- 10 μA
Maximum Receivable Power (Note 6) P
MAX
APF(Note 3), DC to 10Mb/s
-8 - -
dBm
Minimum Receivable Power (Note 6) P
MIN
APF(Note 3), DC to 10Mb/s
-
- -27 dBm
Current Consumption I
CC
-
9 20 mA
High Level Output Voltage V
OH
V
CC
=4.75V
4.1
4.5 - V
Low Level Output Voltage V
OL
V
CC
=4.75V
-
0.1 0.4 V
Note 2: Data rate and transmission distance differ from driver circuit.
High level output when optical flux is received. Low level output when it is not received.
Note 3: All Plastic Fiber (980μm core / 1000μm cladding, NA=0.5). Polished surface.
Transmission loss is less than 0.18dB/m. (100m @650nm).
Note 4: Between input of driver circuit of TODX2350A(F) and output of TODX2350A(F).
A value changes with LED drive circuits.
Note 5: Measure with a standard optical fiber with fiber optic connectors. Valued by peak.
Note 6:
BER≤10
-9
, Valued by peak.