180 CPS
www.vishay.com
Vishay BCcomponents
Revision: 15-Jul-16
3
Document Number: 28415
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 1
Table 2
MOUNTING
The capacitors are designed for automatic placement on to
printed-circuit boards.
Optimum dimensions of soldering pads depend amongst
others on soldering method, mounting accuracy, print
layout and / or adjacent components.
For recommended soldering pad dimensions, refer to Fig. 3
and Table 3.
SOLDERING
Soldering conditions are defined by the curve, temperature
versus time, where the temperature is that measured on the
component during processing.
For maximum conditions refer to Fig. 4.
Any temperature versus time curve which does not exceed
the specified maximum curves may be applied.
As a general principle, temperature and duration shall be the
minimum necessary required to ensure good soldering
connections. However, the specified maximum curves
should never be exceeded.
Fig. 3 - Recommended soldering pad dimensions
DIMENSIONS in millimeters AND MASS
NOMINAL
CASE SIZE
L x W x H
CASE
CODE
L
MAX.
W
MAX.
H
MAX.
Ø D B
MAX.
SL1
MAX.
MASS
(g)
5.3 x 5.3 x 5.7 0506 5.5 5.5 6.0 5.0 0.8 1.5 6.1 ~ 0.15
6.6 x 6.6 x 5.9 0606 6.8 6.8 6.0 6.3 0.8 2.0 7.4 ~ 0.25
6.6 x 6.6 x 7.7 0608 6.8 6.8 8.0 6.3 0.8 2.0 7.4 ~ 0.4
8.4 x 8.4 x 6.7 0807 8.6 8.6 7.0 8.0 1.1 3.1 9.2 ~ 0.5
8.4 x 8.4 x 12 0812 8.6 8.6 12.5 8.0 1.1 3.1 9.2 ~ 0.8
10.4 x 10.4 x 7.7 1008 10.6 10.6 8.0 10 1.3 4.7 11.2 ~ 0.9
10.4 x 10.4 x 12.6 1013 10.6 10.6 12.7 10 1.3 4.7 11.2 ~ 1.3
TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES
NOMINAL
CASE SIZE
L x W x H
CASE
CODE
PITCH
P
1
TAPE WIDTH
W
TAPE
THICKNESS
T
2
REEL DIAMETER
PACKAGING
QUANTITY
PER REEL
5.3 x 5.3 x 5.7 0506 12 12 6.2 380 1000
6.6 x 6.6 x 5.9 0606 12 16 6.2 380 1000
6.6 x 6.6 x 7.7 0608 12 16 8.3 380 1000
8.4 x 8.4 x 6.7 0807 12 16 6.8 380 1000
8.4 x 8.4 x 12 0812 16 16 13.0 380 400
10.4 x 10.4 x 7.7 1008 16 24 10.0 380 500
10.4 x 10.4 x 12.6 1013 16 24 14.0 380 400
aac
b