OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

630D226M050CC2A

P1-P3
630D
www.vishay.com
Vishay Sprague
Revision: 20-Jul-16
1
Document Number: 42044
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Aluminum Capacitors
+125 °C, Miniature, Axial Lead
FEATURES
• Extended temperature range
• Economical
• Low DCL option
• For timing circuit applications
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Available
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case size
Ø D x L in mm
0.248" x 0.689" [6.3 x 17.5]
to 0.492" x 1.752" [12.5 x 44.5]
Operating temperature -55 °C to +125 °C
Rated capacitance range, C
R
6.8 μF to 3900 μF
Tolerance on C
R
± 20 %
Rated voltage range, U
R
3 WV
DC
to 63 WV
DC
Termination Axial leaded
Life validation test at 125 °C
500 h for case size BB to CB
1000 h for case size CC to DF
2000 h for case size DH to FK
CAP
20 % from initial
measurement.
ESR
1.5 x initial specified limit.
DCL
initial specified limit.
Shelf life
500 h at 85 °C
CAP
20 % from initial
measurement.
ESR
1.5 x initial specified limit.
DCL
3 x the initial specified limit.
DC leakage current
I = 0.004 CV + 3 (3 V
DC
to 63 V
DC
)
I in μA, C in μF, V in Volts
RIPPLE CURRENT MULTIPLIERS
TEMPERATURE
AMBIENT TEMPERATURE MULTIPLIERS
+105 °C 0.5
+85 °C 1.0
+65 °C 2.0
+55 °C or less 2.5
FREQUENCY (Hz)
WV
DC
50 TO 60 100 TO 120 300 TO 400 > 1000
3 to 63 0.90 1.00 1.10 1.35
DIMENSIONS in inches [millimeters]
CASE
CODE
NOMINAL STYLE 2 STYLE 5
D L D (max.) L (max.) D (max.) L (max.)
BB 0.248 [6.3] 0.689 [17.5] 0.276 [7.0] 0.756 [19.2] 0.276 [7.0] 0.815 [20.7]
CB 0.315 [8.0] 0.689 [17.5] 0.339 [8.6] 0.756 [19.2] 0.339 [8.6] 0.815 [20.7]
CC 0.315 [8.0] 0.807 [20.5] 0.339 [8.6] 0.878 [22.3] 0.339 [8.6] 0.937 [23.8]
DC 0.374 [9.5] 0.807 [20.5] 0.402 [10.2] 0.878 [22.3] 0.402 [10.2] 0.937 [23.8]
DD 0.374 [9.5] 0.945 [24.0] 0.402 [10.2] 1.004 [25.5] 0.402 [10.2] 1.063 [27.0]
DF 0.374 [9.5] 1.260 [32.0] 0.402 [10.2] 1.319 [33.5] 0.402 [10.2] 1.378 [35.0]
DH 0.374 [9.5] 1.496 [38.0] 0.402 [10.2] 1.567 [39.8] 0.402 [10.2] 1.626 [41.3]
EF 0.433 [11.0] 1.260 [32.0] 0.465 [11.8] 1.319 [33.5] 0.465 [11.8] 1.378 [35.0]
EH 0.433 [11.0] 1.496 [38.0] 0.465 [11.8] 1.567 [39.8] 0.465 [11.8] 1.63 [41.3]
FH 0.492 [12.5] 1.496 [38.0] 0.516 [13.1] 1.567 [39.8] 0.516 [13.1] 1.63 [41.3]
FK 0.492 [12.5] 1.752 [44.5] 0.516 [13.1] 1.83 [46.5] 0.516 [13.1] 1.89 [48.0]
630D
www.vishay.com
Vishay Sprague
Revision: 20-Jul-16
2
Document Number: 42044
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• For lead (Pb)-free / RoHS compliant products add suffix “E3” to part number.
Example: 630D157M030DF2AE3
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
DIMENSIONS AND AVAILABLE FORMS
PART NUMBER INFORMATION
630D 826 M 003 BB 2 A
TYPE CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING
CASE CODE CASE STYLE PACKAGING
Identifies
the series
name.
Expressed in pF.
The first two digits
are significant
figures. The third
is the number
of zeros.
M = -20 % / +20 %
A = -10 % / +10 %
Expressed in
volts. The letter
“R” signifies a
decimal point
(i.e. 6R3 = 6.3 V).
See table
Dimensions.
2 = polyester insulating
sleeve (Std.)
5 = polyester insulating
sleeve with resin
end seal (required for
exposure to halogenated
cleaning solvents)
A = bulk pack (Std.)
T = tape and reel
(Not available in G
and L diameters)
L
Ø D
Case Style 2
31.75
Lead diameter
No. 20 AWG (0.032" [0.813 mm] Dia.)
31.75
Case Style 5
L
Ø D
31.75
31.75
Epoxy end seal
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
P1-P3

630D226M050CC2A

Mfr. #:
Buy 630D226M050CC2A
Manufacturer:
Vishay
Description:
Aluminum Electrolytic Capacitors - Axial Leaded 22uF 50V 8x20.5 125 C Axi
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet