PC MOUNTING
GS02 -omit pad 2. GS02 -omit pad 2.
SA Terminal Style SA1 Terminal Style SC Terminal Style
SC1 Terminal Style
SV1 Terminal Style
GS02 Models
SV1 Terminal Style
GS01 Models
Ultra-Miniature
Surface Mount Slide SwitchesGS Series
E
E-13
COMPONENTS, INC.
57 Stanley Avenue, Watertown, MA 02172 Tel: (617) 926-6400 Fax: (617) 926-6846 Sales: (800) 635-5936
CAUTION: PC mounting layouts and pads as shown are designed to be compatible with the latest equipment and reflow techniques. Care should be taken in the design and location of PC lands
to suit individual needs. Orientation relative to reflow direction may significantly impact solder joint integrity.
HOW TO ORDER
Complete part numbers for GS SERIES ULTRA-MINIATURE SURFACE MOUNT SLIDE SWITCHES are shown on pages E-11
and E-12. Switches available on embossed anti-static tape and reels per EIA 481-3, consult factory. GS Series thru-hole models
also available, see pages E-9 and E-10.
SPECIFICATIONS
CONTACT RATING: 0.4 VA max. @ 20 V AC or DC max.
MECHANICAL & ELECTRICAL LIFE: 40,000 make-and-break
cycles at full load.
CONTACT RESISTANCE: Below 50 milliohms typ. initial @
2–4 V DC, 100 mA.
INSULATION RESISTANCE: 10
9
ohms min.
DIELECTRIC STRENGTH: 500 V RMS min. @ sea level.
OPERATING TEMPERATURE: –30C to 85C.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
PACKAGING: Some models available on embossed anti-static tape
and reels per EIA 481-3. Tape and cover strip are conductive
for use near statically sensitive components, consult factory.
MATERIALS
HOUSING AND BASE: Glass filled nylon 4/6, flame retardant,
heat stabilized (UL 94V-0).
ACTUATOR: Polyetherimide PEI (UL 94V-0), with standard
internal seal.
SWITCH SUPPORT: Brass, tin plated.
MOVEABLE CONTACTS: Beryllium copper, with gold plate over
nickel plate.
STATIONARY CONTACTS: Copper alloy, with gold plate over
nickel plate.
TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
TERMINAL SEAL: Epoxy. All terminals insert molded.
NOTE: Specifications and materials listed above are general specifications for switches with standard options. For information on specific and custom switches, consult factory.