© Semiconductor Components Industries, LLC, 2016
July, 2016 − Rev. 11
1 Publication Order Number:
MC10E431/D
MC10E431, MC100E431
5 V ECL 3‐Bit Differential
Flip‐Flop
Description
The MC10E/100E431 is a 3-bit flip-flop with differential clock,
data input and data output.
The asynchronous Set and Reset controls are edge-triggered rather
than level controlled. This allows the user to rapidly set or reset the
flip-flop and then continue clocking at the next clock edge, without the
necessity of de-asserting the set/reset signal (as would be the case with
a level controlled set/reset).
The E431 is also designed with larger internal swings, an approach
intended to minimize the time spent crossing the threshold region and
thus reduce the metastability susceptibility window.
The differential input structures are clamped so that the inputs of
unused registers can be left open without upsetting the bias network of
the device. The clamping action will assert the D
and the CLK sides of
the inputs. Because of the edge triggered flip-flop nature of the device
simultaneously opening both the clock and data inputs will result in an
output which reaches an unidentified but valid state. Note that the
input clamps only operate when both inputs fall to 2.5 V below V
CC
.
The V
BB
pin, an internally generated voltage supply, is available to
this device only. For single-ended input conditions, the unused
differential input is connected to V
BB
as a switching reference voltage.
V
BB
may also rebias AC coupled inputs. When used, decouple V
BB
and V
CC
via a 0.01 mF capacitor and limit current sourcing or sinking
to 0.5 mA. When not used, V
BB
should be left open.
The 100 Series contains temperature compensation.
Features
• Edge-Triggered Asynchronous Set and Reset
• Differential D, CLK and Q; V
BB
Reference Available
• 1100 MHz Min. Toggle Frequency
• PECL Mode Operating Range: V
CC
= 4.2 V to 5.7 V
with V
EE
= 0 V
• NECL Mode Operating Range: V
CC
= 0 V
with V
EE
= −4.2 V to −5.7 V
• Internal Input 50 kW Pulldown Resistors
• ESD Protection:
♦ > 2 kV Human Body Model
♦ > 200 V Machine Model
♦ > 2 kV Charged Device Model
• Meets or Exceeds JEDEC Spec EIA/JESD78 IC
Latchup Test
• Moisture Sensitivity: Level 3 (Pb-Free)
(For Additional Information, see Application Note AND8003/D
)
• Flammability Rating: UL 94 V−0 @ 0.125 in,
Oxygen Index: 28 to 34
• Transistor Count = 348 Devices
• These Devices are Pb-Free, Halogen Free and are RoHS Compliant
MARKING DIAGRAM*
xxx = 10 or 100
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G = Pb-Free Package
PLCC−28
FN SUFFIX
CASE 776−02
www.onsemi.com
*For additional marking information, refer to
Application Note AND8002/D
.
MCxxxE431FNG
AWLYYWW
128
MC10E431FNG PLCC−28
(Pb-Free)
37 Units / Tube
MC10E431FNR2G 500 Tape & Reel
PLCC−28
(Pb-Free)
†For information on tape and reel specifications, in-
cluding part orientation and tape sizes, please refer
to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D
.
ORDERING INFORMATION
Device Package Shipping†
MC100E431FNR2G
PLCC−28
(Pb-Free)
500 Tape & Reel