www.wihatools.com
Wiha Quality Tools
Germany
95
Warning!
Insulated tools are not intended for use on live or energized circuits. Always
disconnect and de-energize all equipment & circuits. NEVER!
work on live or
energized circuits or equipment.
201
Inch Open-Ended Spanners, With Insulated Handle
Insulation According to VDE Specification 0680 and EN/IEC 60900,
DIN 7446, up to 1000 Volt. Individually Tested. Chrome-vanadium
steel, hardened. Angled 15
O
.
Item OAL OAL
No. Inch mm Inch lbs. pkg.
201 33 5/16 100 3.9 .05 1
201 35 3/8 105 4.1 .07 1
201 36 7/16 117 4.6 .09 1
201 37 1/2 140 5.5 .15 1
201 38 9/16 146 5.7 .15 1
201 40 5/8 158 6.2 .20 1
201 41 11/16 165 6.5 .23 1
201 42 3/4 178 7.0 .33 1
201 44 13/16 191 7.5 .42 1
201 45 7/8 192 7.6 .44 1
201 46 15/16 201 7.9 .51 1
201 47 1 213 8.4 .61 1
201 48 1-1/16 233 9.2 .79 1
201 49 1-1/8 233 9.2 .77 1
* Lengths are +/- 5% due to coating process
Wiha Insulated Open-Ended Spanners
1000Volt
201 90
Set 14 Pcs. Insulated Inch Open End Insulated Spanners
Item OAL OAL
No. Inch Inch Inch Inch lbs.
201 90 201 33 5/16 3.9 201 42 3/4 7.0 3.0
201 35 3/8 4.1 201 44 13/16 7.5
201 36 7/16 4.6 201 45 7/8 7.6
201 37 1/2 5.5 201 46 15/16 7.9
201 38 9/16 5.7 201 47 1 8.4
201 40 5/8 6.2 201 48 1-1/16 9.2
201 41 11/16 6.5 201 49 1-1/8 9.1
1000Volt
Steel
Forged from chrome
vanadium, meets - DIN 3110
Angled 15
O
Insulation
High visibility, grip is
double coated
Insulation Test Standards:
Insulation according to ASTM F-1505-01,
EN/IEC 60900, VDE 0680, DIN 7446
Each tool individually
tested to 10,000 volts
and certified to 1000
Volt ac or 1500 Volt dc
1000V
201 92
Set 8 Pcs. Insulated Inch Open End Insulated Spanners
Item OAL OAL
No. Inch Inch Inch Inch lbs.
201 92 201 33 5/16 3.9 201 38 9/16 5.7 1.4
201 35 3/8 4.1 201 40 5/8 6.2
201 36 7/16 4.6 201 41 11/16 6.5
201 37 1/2 5.5 201 42 3/4 7.0
1000Volt
Use & Care Guide For Insulated Tools:
Store tools to minimize risk of damage to insulation, always wear
approved eye protection, Inspect insulation prior to each use of any
insulated tool. Use insulated tools where the ambient temperature is
between -20 to +70
O
C. Have a qualified safety technician visually
inspect insulation on tools annually for safe use.
NEW
From Wiha
Go To
Image Index
Go To
Numerical Index
I
N
D
E
X
SHOP
SHOP
SHOP
PREVIOUS NEXT
