AKT8112100 Datasheet AKT4H1112001, AKT4H111200, AKT4H111205 | P1-P3

KT Temperature

Controller

KT2 Series

[48×24×98.5mm]

KT9 Series

[96×96×98.5mm]

KT8 Series

[48×96×98.5mm]

KT4H/B Series

[48×48×56mm]

KT4 Series

[48×48×95mm]

KT7 Series

[22.5×75×100mm]

KT4H

KT4B

Your Simple, Accurate and Economical

Temperature Controller

Compact temperature controller (DIN

48×24) that can support pattern control

Additions to KT2 series

Broad lineup of temperature controllers

allow you to satisfy application and space requirements.

Compliance with RoHS Directive

(Sample System Configuration)

FPΣ Programmable Controller

(Panasonic Electric Works)

Up to 31 units can be connected

RS-485

*In the configuration above, the FPΣ requires a

communication cassette (FPG-COM3).

*Modbus is a communication protocol developed for

PLCs by Modicon Inc.

FEATURES

1. Multi-input

Versatile thermocouple, RTD, DC voltage

and DC current input for temperature

detecting sensors

2. Simple operation enables highly

accurate temperature control

All required operations can be enabled

by the front keys and highly accurate PID

control mode ensures an input span of

±0.2%.

3. DIN Rail mounting types are aligned

taking global market demand into

consideration

The KT7 series is equipped with DIN rail

mounting complying to DIN standards.

Furthermore, because its control panel is

compact, the KT7 saves space.

4. Nine step pattern control possible.

For KT2 series, despite DIN 48 × 24 size,

selection is possible of control with fixed

set point and nine step pattern control.

5. Meets market demands for cost-

effectiveness

The KT series offers both economy and

high performance.

6. The KT series complies with UL,

CSA standards and CE marking.

7. Improved visibility and ease of

operation

More compact than before

The KT4H/KT4B series features the

largest PV digit size in the industry.

Visibility is improved with an 11-segment

display. Connectable to a PC, it offers a

full range of control and communication

functions.

8. Communication specification uses

RS485 (Modbus protocol)

KT (AKT2,4,7,8,9,4H,4B)

PRODUCT TYPES

1. KT2 Series

* When heating/cooling is selected, alarm output 1 cannot be used.

When the communication function is selected, alarm output 2 cannot be used.

• Part No.

(Ex) Part No. when the optional functions (of Heating/Cooling control: relay contact output + Communications function) is added on to

the basic model are as follows; Part No.: AKT21110101

• Options

Note: When Current input is speciﬁed, a shunt resistor (sold separately) is required.

2. KT4 Series

Notes: 1. CT1 or CT2 for current detection is provided as an accessory when heater burn-out alarm function is added.

2. Event output will be shared if you choose alarm output 2 and the heater burnout alarm.

• Part No.

(Ex) Part No. when the optional functions (of Heating/Cooling control: SSR output + Communications function) is added on to the

basic model are as follows; Part No.: AKT41111401

• Options

Note: When Current input is speciﬁed, a shunt resistor (sold separately) is required.

Base

model

Power

supply

Sensor

input

Control

output

Alarm

output

Heating/

cooling

control

Heater

burnout

alarm

Commu-

nication

function

Description

AKT2 48 × 24 × 98.5mm

1 100 to 240V AC

Must be

speciﬁed

2 24V AC/DC

1 Multi-input (Thermocouple, RTD, DC current and DC voltage)

1 Relay contact output 1a 3A 250V AC

Must be

speciﬁed

2 Non-contact voltage output (for SSR drive)

3 Current output

200Blank

When both heating/cooling and communication functions are not added:

Relay contact output (alarm 1): Can be used

Open collector output (alarm 2): Can be used

110Blank

When only heating/cooling function is added:

Relay contact output (alarm 1): Cannot be used

Open collector output (alarm 2): Can be used

1001

When only communication function is added:

Relay contact output (alarm 1): Can be used

Open collector output (alarm 2): Cannot be used

0101

When both heating/cooling and communication functions are added:

Relay contact output (alarm 1): Cannot be used

Open collector output (alarm 2): Cannot be used

Product name Part No.

Shunt resistor (for Current input) AKT4810

Ter minal cover AKT2801

Base

model

Power

supply

Sensor

input

Control

output

Alarm

output

Heating/

cooling

control

Heater

burnout

alarm

Commu-

nications

function

Description

AKT4 48 × 48 × 95mm

1 100 to 240V AC

2 24V AC/DC

1 Multi-input (Thermocouple, RTD, DC Voltage and DC Current)

1 Relay contact output 1a 3A 250V AC

2 Non-contact voltage output (for SSR drive)

3 Current output

1 Relay contact output 1a (Alarm output 1)

2 Relay contact output 1a (Alarm output 2)

0 Not available

SSR output 0.3A 250V AC (Heating/Cooling control not supported when 2

alarm output points are selected)

0 Not available

5A (Heater burn-out alarm not supported when control output is current

output type/not supported when heating and cooling control is selected)

10A (Heater burn-out alarm not supported when control output is current

output type/not supported when heating and cooling control is selected)

20A (Heater burn-out alarm not supported when control output is current

output type/not supported when heating and cooling control is selected)

50A (Heater burn-out alarm not supported when control output is current

output type/not supported when heating and cooling control is selected)

Not available

1Available

Product name Part No.

Shunt resistor (for Current input) AKT4810

Ter minal cover AKT4801

KT (AKT2,4,7,8,9,4H,4B)

3. KT8 Series

Notes: 1. CT1 or CT2 for current detection is provided as an accessory when heater burn-out alarm function is added.

2. If a communication function is added, second main setup is not possible

• Part No.

(Ex) Part No. when the optional functions (of Alarm output; Alarm output 2 + Heating/Cooling control: Current output) are added on to

the basic model are as follows; Part No.: AKT8111230

• Options

Note: When Current input is speciﬁed, a shunt resistor (sold separately) is required.

4. KT9 Series

Notes: 1. CT1 or CT2 for current detection is provided as an accessory when heater burn-out alarm function is added.

2. If a communication function is added, second main setup is not possible

• Part No.

(Ex) Part No. when the optional functions (of Alarm output; Alarm output 2 + Heating/Cooling control: Non-contact voltage output) are

added on to the basic model are as follows; Part No.: AKT9111220

• Options

Note: When Current input is speciﬁed, a shunt resistor (sold separately) is required.

Base

model

Power

supply

Sensor

input

Control

output

Alarm

output

Heating/cool-

ing control

Heater burn-

out alarm

Communica-

tions function

Description

AKT8 48 × 96 × 98.5mm

1 100 to 240V AC

2 24V AC/DC

1 Multi-input (Thermocouple, RTD, DC Voltage and DC Current)

1 Relay contact output 1a1b 3A 250V AC

2 Non-contact voltage output (for SSR drive)

3 Current output

1 Relay contact output 1a (Alarm output 1)

2 Relay contact output 1a (Alarm output 2)

0 Not available

1 Relay contact output 1a